Hardwiring a V1...

[kennyisdead911]

I have searched around here a bit and couldn't seem to find the switched 12V power in the overhead pannel. (by the sunroof controls)....I will double check obviously with a voltmeter, but does anybody know the color of the wire? I have an e70 3.0si

can anybody help me out?

Thanks...

[HaroldC]

http://www.xoutpost.com/x5-e70-forum/...?highlight=KEF

[kennyisdead911]

Thanks, sorry for being an x5world n00b....i spend most of my time on e46

I will take pics and document the install

[HaroldC]

e46fanatics?

[kennyisdead911]

yea e46fanatics....the v1 didn't come today, so I gotta wait another day to DIY keep checking back

[buschy]

I think it was a green/white wire on the second set of plugs

[kennyisdead911]

I just hardwired my v1, everything works perfectly. It is the green and white wire on the second set of plugs....I will have pictures either later today or tomorrow....my second mod yeauh!!! (first mod were tints)

[KEF]

Originally Posted by kennyisdead911

I just hardwired my v1, everything works perfectly. It is the green and white wire on the second set of plugs....I will have pictures either later today or tomorrow....my second mod yeauh!!! (first mod were tints)

Do a search on t-tap + KEF as well, the blue t-tap that comes with the V1 is not the correct tap for the green / white wire as well.

If you want to ensure a positive connection down the road, you should switch over to the maroon tap 951 tap.

Cheers,
KEF

[kennyisdead911]

haha funny you said that....it took me an extra like half hour of playing around with the tap to figure out that its not the right one....so yea I got that maroon one from radioshack and no problems....I also wrapped up all the wires in felt so they woudln't rattle... works great!