x5 navigation maps

[BMW_F1]

Originally Posted by apw2607

Groan.

For 2010 cic based nav the customer can update the map themselves. The difference with cic map updates is that not only do you order the media (DVDs) you also need to order a special enabling code for your car .. It's based on the vin #. your dealer can order these codes for you.

Bmw added the enabling code for nav map updates to lock down nav map updates.

Nav DVDs for 2010+ cic systems are about $7

The enabling code however is $180.

However, to update the maps there is a software update that must be completed. That cannot be done by the customer, without appropriate equipment.

[ard]

Originally Posted by BMW_F1

However, to update the maps there is a software update that must be completed. That cannot be done by the customer, without appropriate equipment.

Do you have a source for this assertion?

Because the published BMW procedure allows this to be done by the owner- and if the car needs software updating to be able to do this, it must be free under the warranty!

You buy the DVDs (3 disc set, for the CIC data maps) with an MSRP of $9-10. Then you buy an FSC activation code ($400 at dealers, $250 or so dealer 'cost', or $100 on the internet.) Load the first disc, enter the 20 digit FSC code and off you go.

So if there is a software update that only the dealer can do to allow this process to work, that would be an issue...