|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#41
04-22-2013, 09:54 AM
|
||||
|
||||
|
The only parts needed are the calipers & pads, rotors, wear sensor and backing plates... the 4.8i hubs worked fine. I have 12mm spacers on the front, but you do not need any for the 214s to clear the Calipers.  FYI, the Aluminum ///M Calipers are about 1/2 the weight of the steel OEs they replaced. The 2 piece Aluminum and steel rotors (395mm vs 345mm) are only about 2/3 the weight of the steel OEs that they replaced. I din't do anything to the rears. Braking is immediate and very linear, love it!
__________________
 2008 4.8i X5 (2/25/08) 105k: Titanium Silver/Black; All -HUD; Aero Kit; 22" VS-130 w/Pirellis; ///M Shifter & Fr Brakes; Gauge Rings; Console Pads; Custom Wheel & Mats; Roof Rails Carbon Fiber: Int Trim, Nav Surround, Grill, Cluster Trim, Shifter & Eyelids 1.2" H&R; LUX AEs; LCI Tails; Rear Fogs; NBT EVO; ESS Tune; Meisterchaft GTC Exhaust Last edited by 95wildtt; 04-27-2013 at 09:16 AM. 
|
| Sponsored Links | |
|
|
|
|
#43
04-25-2013, 07:14 PM
|
||||
|
||||
|
Very nice! Must do this...
BTW, how did you tint your roundels? I used a 'smoked' 3M vinyl/film, but I'm not too happy with some of the edges.
__________________
Current 2018 F85 X5 M - Individual 2012 E70 xDrive35d - 0km 2002 E53 4.6is - DINAN Past 2002 E53 3.0d Sport 2007 E70 3.0sd 2008 E70 3.0is M-Sport 2008 E70 3.0d 2008 E70 X5 M 2011 E70 xDrive40d 2013 E70 xDrive40d
|
|
#45
04-26-2013, 12:12 AM
|
||||
|
||||
|
I used the Duplicolor Shadow Kit on the Roundels, wheel caps, and all emblems to get a black chrome color.
Quote:
__________________
2008 4.8i X5 (2/25/08) 105k: Titanium Silver/Black; All -HUD; Aero Kit; 22" VS-130 w/Pirellis; ///M Shifter & Fr Brakes; Gauge Rings; Console Pads; Custom Wheel & Mats; Roof Rails Carbon Fiber: Int Trim, Nav Surround, Grill, Cluster Trim, Shifter & Eyelids 1.2" H&R; LUX AEs; LCI Tails; Rear Fogs; NBT EVO; ESS Tune; Meisterchaft GTC Exhaust
|
|
#46
03-21-2014, 05:59 AM
|
|||
|
|||
|
Sorry to bump this up. Do the brakes have sensors on both left and right pads? I'm picking up a set but from the pictures it looks like its just on 1 side?
Also are the brake hoses different? Just want to confirm if I am going to end up having to purchase new set of pads due to 1 side having an absent wear sensor and if I need to factor in hoses due to be different on that on my stock 365mm setup. Thanks!
|
|
#47
03-21-2014, 07:37 AM
|
||||
|
||||
|
No, there is only a sensor on one side. I forget which one though.
Yes, the hoses are the same.
__________________
2008 4.8i X5 (2/25/08) 105k: Titanium Silver/Black; All -HUD; Aero Kit; 22" VS-130 w/Pirellis; ///M Shifter & Fr Brakes; Gauge Rings; Console Pads; Custom Wheel & Mats; Roof Rails Carbon Fiber: Int Trim, Nav Surround, Grill, Cluster Trim, Shifter & Eyelids 1.2" H&R; LUX AEs; LCI Tails; Rear Fogs; NBT EVO; ESS Tune; Meisterchaft GTC Exhaust
|
|
#49
03-21-2014, 11:24 AM
|
|||
|
|||
|
I have a set I was going to put on my wife's diesel but I think I am going oh sell them instead.
__________________
X5M Eisenmann exhaust, de-Catted down pipes, 22" HRE wheels, ECUProgram stage II (700hp) tune X5 35d Tuned and Lowered
|
|
#50
03-21-2014, 03:44 PM
|
|||
|
|||
|
PM me if you do.
|
|
| Bookmarks |
|
|
|
|
Linear Mode
