|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#61
|
|||
|
|||
Quote:
I did found those settings such as MDrive, HUD_M etc in backup file, does it indicate those m_hud settings are now in other module or probably there is new module for m_hud?
__________________
2012 X5 35i: Hitch installed; Coded; |
Sponsored Links | |
|
#62
|
|||
|
|||
That's awesome how easy it is to do these things these days.
|
#63
|
|||
|
|||
I am going to be getting my car coded this week and just had a question about the M-HUD.
The pic shows what gear the vehicle is in in the middle. RPMs in the colored circle, speed in small numbers on the bottom right. Is that the only setting? Is it possible to show the speed in the middle of the circle and gear in the bottom right? I've gotten so used to the HUD, that I never look down to look at speed anymore and it's nice to have the big numbers staring you in the face on your windshield. |
#64
|
|||
|
|||
Ok, I can tell you have to have HUD to take avantage of the m-hud. Oh well.
There are other things I would love coded on my 2008 X5 4.8. The foglights come on automatically when the headlights come on. Question : If you code the mirrors to automatically close when the door is locked with comfort access or the keyfob. Does the mirrors then automatically open when you unlock the doors? Anyone in or close to Western North Carolina want to help me out with the coding (help me out as in doing it for me). I will pay for the help. Last edited by is300e30; 12-19-2011 at 05:00 PM. |
#65
|
|||
|
|||
Hi,
Does anyone now if i can use the cable that came with my JBD reset tool to connect to my car's OBDC ? One end it has the OBDC connector but the other end has a serial connector, similar to a monitor cable ...
__________________
2011 BMW X5 35d - Titanium Gray/Black Leather PP, SPP, HIFI Radio, Manual Sunshades, Step rails, LED Coronas, Brushed Aluminum Roof Rails, HID Fogs, 22"Hartge Classic II :Front 10.5x22 - 295-30-22 Rear 12x22- 335-25-22 |
#66
|
|||
|
|||
Quote:
Quote:
Quote:
__________________
| '17 F15 X5 35D - Work horse | '17 F48 X1 MSport Daughter's daily | '22 Tesla MY LR Wife's Daily | '09 E70 X5 35D - Out to pasture | |
#67
|
|||
|
|||
Sounds like with mhud though, you get an option in idrive to turn mhud on and off, so I could have traditional speed on window and then turn on mhud on the occasions that I want it. Right?
|
#68
|
|||
|
|||
Is this calibrated correctly for either the regular gas or diesel engine. Isn't this calibrated for the m engine only and therefore isn't this setting pointless unless you have a real m engine ?
The diesel engine only revs to approx 5000 rpm. |
#69
|
|||
|
|||
Its not calibrated, but you can calibrate it. I haven't done it.
__________________
| '17 F15 X5 35D - Work horse | '17 F48 X1 MSport Daughter's daily | '22 Tesla MY LR Wife's Daily | '09 E70 X5 35D - Out to pasture | |
#70
|
|||
|
|||
Has anyone ever had problems with coding? Any features that work before but not work after coding?
I have a late January 2012 build, actually just finished on January 25th and is shipping to the dealer. I would really like to have the mirrors close on lock, idrive disclaimer removal, trunk raise and lower with key fob. Now, how can the mhud be calibrated? Just ordered the cable but a little worried, seems a little hackish.
__________________
'12 35D AW-CINN www.playabonita.ca -- wifes bathing suit company -- pretty girls... |
Bookmarks |
|
|
|