Positive Camber!

[FSETH]

Originally Posted by macming

I have Vorschlag camber plates for my E46 M3, but the E70 X5 doesn't have the same type of suspension setup. AFAIK the only way to adjust front camber is using another camber arm, but I'm not sure if we'd use the lower or upper control arm.

I am not positive, but I think you replace the upper arm.

What were your toe settings?

[macming]

Originally Posted by FSETH

I am not positive, but I think you replace the upper arm.

What were your toe settings?

Some links of front suspension parts

RealOEM.com * BMW E70N X5 35iX Frnt axle support,wishbone/tension strut

It looks like I need part #16. Should I get the -30 min or +30 min model?

My toe was set at 1/16" on both wheels. Nothing too drastic.

[FSETH]

Originally Posted by macming

Some links of front suspension parts

RealOEM.com * BMW E70N X5 35iX Frnt axle support,wishbone/tension strut

It looks like I need part #16. Should I get the -30 min or +30 min model?

My toe was set at 1/16" on both wheels. Nothing too drastic.

I don't want to steer you wrong. I would call your local dealer and ask them which one you need to increase negative camber.

[macming]

Originally Posted by FSETH

I don't want to steer you wrong. I would call your local dealer and ask them which one you need to increase negative camber.

My mechanic said I need the one that is -30mm I'll keep everyone posted. Here is the results of my original alignment. Keep in mind the front end was not adjusted.