|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Engine Compartment Partition Broken - Replacement Help
Hi All,
I have a broken part 10 on RealOEM.com * BMW E70 X5 3.5d Mounting parts, engine compartment. Also, missing the screw that attaches near the left fender. The entire assembly (right part 10, center part 14 and left part 10) is detached from the bulkhead. There is a lot of black sealant which I assume was adhering them. I'm surprised that only sealant was used here. Has anyone run into this problem and what did you use to fix? Also, part number for the screw would be appreciated. Using zip ties now. Thanks! |
#2
|
|||
|
|||
Replace all 3 pieces to be safe.
And you'll need rivets, not screws. |
#3
|
|||
|
|||
Thanks for the suggestion. Anyone know what adheres the pieces to the bulkhead and the part number for the rivets? Thanks.
|
#5
|
|||
|
|||
Quote:
|
#6
|
||||
|
||||
You're welcome! Did you check the injectors under the foam insulation?
If it is corroded, the plastic itself will be least of your problem at some point. |
#7
|
|||
|
|||
Not yet, but I plan to when I replace the plastics. Thanks again!
|
#8
|
|||
|
|||
Were these plastic partition pieces hard to replace? Mine are all cracked too.
|
#9
|
|||
|
|||
Easy fix. Go for it!
|
#10
|
|||
|
|||
I see in my x5s.service.history bmw replaced.These .... why did.the first.ones.fail is my question
|
![]() |
Bookmarks |
|
|
|