|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#11
|
|||
|
|||
|
Sponsored Links | |
|
#12
|
||||
|
||||
Quote:
Too bad I have the 4.8. Wouldn't see much gain from this N/A engine. |
#13
|
|||
|
|||
hear ya. i had my e53 dinan tuned back in 2008. complete waste of money.
|
#14
|
||||
|
||||
Reviving this as I've been looking into doing meth again. A guy over on the F10 M5 boards just got like 820hp from his car, I asked which kit he's using and he sent me this link - Aquamist HFS-4 Injection System | Howerton Engineering
__________________
650hp 10 X5///M - Stage 2, Vibrant 1794's , gutted cats, custom intake, AC Forged 22's 325hp 98 BMW 740iL - ///M5 6spd, www.bavengine.com w/ Performance Option, electric fan, CF intake tube w/ heatshield, Mag 14816 w/ notched bumper, Bilstein/H&R Stage II/Powerflex 600+hp 02 Harley F150 - MHP900 Stage 3 engine, KB2.3, 8# lower, 60# inj, Walbro FP's 135hp 01 TL1000R - M4 full exhaust, K&N, Yosh box, -1/+2 gears, 2CT's
|
#15
|
|||
|
|||
Quote:
|
#16
|
||||
|
||||
Aquamist is the pinnacle of the W/M injection systems and the HFS-3/4 are the newest design systems with comprehensive fail safes built-in. AM can run mixtures from 100% water to 100% methanol without any ill effects on the components. Of course nothing will save you from Murphy's law, but this is as good as it gets.
I have a slightly used HFS-3 with trunk mounted tank/pump from Howerton Engineering for sale. It has been on my race car for some time and it did it's job exactly as intended, saving my engine on a few occasions. I now run E85 so it is a good time to get rid of ~10lbs. |
#17
|
|||
|
|||
Kirk - What nozzle sizes would you recommend for the M57?
|
#18
|
||||
|
||||
Quote:
My problem is that while I'm sure these are great kits, I've got ZERO ECU control with any of these kits that in other vehicles would back off boost, timing, etc once the controller saw a drop of meth pressure via running out, clogged line, etc. With that, what's stopping me from simple getting a $280 Cooling Mist kit Coolingmist Stage 1 (solenoid, s/a injector) with nothing more than a pump, nozzle and using my washer fluis bottle for storage (mind you never going over a 50/50 mix, I was mostly -30 thinking washer and a bottle of Heet) and then I'd have a factory supplied sensor to tell me when the fluid is low.
__________________
650hp 10 X5///M - Stage 2, Vibrant 1794's , gutted cats, custom intake, AC Forged 22's 325hp 98 BMW 740iL - ///M5 6spd, www.bavengine.com w/ Performance Option, electric fan, CF intake tube w/ heatshield, Mag 14816 w/ notched bumper, Bilstein/H&R Stage II/Powerflex 600+hp 02 Harley F150 - MHP900 Stage 3 engine, KB2.3, 8# lower, 60# inj, Walbro FP's 135hp 01 TL1000R - M4 full exhaust, K&N, Yosh box, -1/+2 gears, 2CT's
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|