BMW X5 E70 4.0D Electrical Faults

[Baboo Mather]

Hi I have BMW X5 E70 4.0D with the following complaints. The front windows
don't work, indicators don't flash, headlights stay on with key on, hazards don't work and interior lights don't work. Did anybody have this type of problem. Happened after vehicle was started with engine earth cable loose (on left side engine mounting).
These are the faults codes which appear all the time GWS(gear selector switch) Fault code E095 message (Gearbox Data lin,02), E096 message (terminal status 130) and E097 message (dimming,202) cannot erase.
Display and Information Function: CON(Controller) E2D4 Message(terminal status 0X130 faulty) E2D5 message Dimming(0X202 faulty cannot erase.
Instrument Cluster: A3B0 no message(dimming, 202) A3B4 no message (lamp status 21A) A3C1 no message from FRM control unit A559 Supply was switched off(terminal 30g-f) cannot erase
JBE Junction Box Electronics: A6CF AUC Sensor C91E no message (K-Can terminal status 130.

This is what appears on the screen on dash LIGHTING SYSTEM: control lights and possible turn indicator, fog lights, full beam headlight, flasher defective. Stop vehicle check and continue journey cautiously