|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
||||
|
||||
Charging issues
Adam |
Sponsored Links | |
|
#2
|
|||
|
|||
Correct. Charging is on with the car on only
|
#3
|
|||
|
|||
is there a way to work-around that and have it charge?
Once I get my "no ship's power" issue figured out, I'd like to see if that is possible. The 12v plug in the back of the console does stay on when the car is off. I wonder if you spliced into that power wire and ran it up to the cradle? I'm not smart enough to figure out how to do it, just a thought....
|
#4
|
|||
|
|||
The WHITE wire in the eject box senses if the iginition is on and turns the eject box on and off. It is designed to turn OFF the bluetooth phone charging when the car is off to avoid draining the car battery
Martin |
#5
|
|||
|
|||
Can I connect the WHITE wire to +12V when "ignition on" also to enable charging? Or does it need to go to GND for that?
Ronny |
#6
|
|||
|
|||
connect white to green.
|
#7
|
|||
|
|||
To the "Pairing" line? Does it have an internal pull-up resistor to +12V?
EDIT: Anyway, tried and works fine - permanent charging - big THX! Last edited by rokit; 12-14-2007 at 05:46 AM. |
#8
|
|||
|
|||
that is right, white to green but not 12V. It is 5V as I recall :-)
|
#9
|
||||
|
||||
where can i find the white and green wires? Thanks for your help...8-)
|
#10
|
|||
|
|||
The BT Eject Box has 4 wires:
- Pairing_Key (Green) - +12V (Red) - Cradle_On (or charging!) (White) - GND (Brown) Ronny |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|