Adding V710 snap-in

Phils · #1 03-28-2005, 07:59 PM

So BlueTooth is working fine now in my 5/04 production X5. The dealer upgraded me to the combo BT/Assist module and it works great with the V710 running 1.02SD. Now I think I want the new snap-in adapter for the 710 that replaces the oddment tray. I saw it in someone else's car and it wouldn't charge the phone. Apparently the dealer tells me there are two snap-ins. One that has a pairing button and doesn't charge and one that has no button (not needed w/'05 module) and does charge the phone.
I asked the dealer parts department locally here what I would need to put in the one that charges. The parts guy researched it and called me back to say I'd need the following (wondering if this right):

- Dock $~140 Part # 84210393570

- Eject module (?) $~72 Part # 842169334151

- Base plate for bumper antenna $~82.50 Part # 84216946063

- Bumper Antenna $~63.75 Part # 32684111470326

Seems like a lot of stuff, but have heard I'd need an antenna since Assist uses the one in the car already. Any guidance appreciated.

rangerfan · #2 03-28-2005, 09:42 PM

You need the eject box AND the snap in adapter. That makes no sense, since my snap in is that same part number you have listed, and mine isn't charging, so it is probably the eject box that is different from mine. My eject box HAS the pairing button.

If you want to buy the snap in Phil, let me know. I'd like to get rid of it since I'm using a Treo 650 now.

MookieNYC · #3 03-29-2005, 11:20 PM

Is there a way to connect the Treo 650?

UCrewX5 · #4 03-29-2005, 11:29 PM

Quote:

Originally Posted by MookieNYC

Is there a way to connect the Treo 650?

Connect in what way? Rangerfan is connecting his Treo 650 to the integrated phone system via the Bluetooth interface. There is no snap-in adaptor available for the Treo 650, however.

mfrymier · #5 04-05-2005, 12:15 PM

The most recent BMW TSB specifically states that "the snap in adapters should not be used in 2004 X5's with the new 2005 Assist/BT retrofitted" (or something to that effect) Read the new TSB before you start messing with a snap in adapter...

rangerfan · #6 04-05-2005, 01:46 PM

What TSB? Does anyone have access to it? I have a 2004 with the old -552 module and old eject box, and my snap in still doesn't work. So we're missing some bit on info here.

Jeff330xi · #7 04-24-2005, 03:11 PM

Quote:

Originally Posted by mfrymier

The most recent BMW TSB specifically states that "the snap in adapters should not be used in 2004 X5's with the new 2005 Assist/BT retrofitted" (or something to that effect) Read the new TSB before you start messing with a snap in adapter...

Odd... I have a 04/2004 with the 2005 TCU and the snap in and it charges the phone fine. (I have the snap-in with the pairing button) My issue is reception because Assist is using the one and only cell antenna in the car. If I disconnect the antenna from the TCU and connect it the coax that goes to the center console, signal strength goes up as expected.
I'm looking at adding a separate antenna. A couple nights ago I tore the car apart to see if there is room for another antenna under the rear wing.
Found the GPS antenna (P/N 65.90-8-381 206 first pic), Cellular antenna (PN 6-905-950) and the radio antenna in the rear window. There was a third antenna in the wing, that was flat, like a FM antenna for your home stereo. Maybe another FM antenna? I'm assuming the antenna in the side window is also another radio antenna. So the X5 has three FM antennas? Dunno.

I don't think I'll be able to put another BMW cell antenna under the wing, I currently considering a 3 series "shark fin" antenna or maybe one off a MB E series. Sorry for the poor quality of the photo took it with my SE T616 phone which has a terrible camera.

-Jeff