|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#11
|
|||
|
|||
|
Sponsored Links | |
|
#12
|
|||
|
|||
Quote:
So it did work even without the adapter? did you use the bit2 adapter? |
#13
|
|||
|
|||
Quote:
good luck |
#14
|
|||
|
|||
I can post some pictures of my installation if u want
|
#15
|
|||
|
|||
that would be really nice.
actually i donīt really understand the problem in my case. it should work. this is my setup in stock condition: The antenna is still connected, i removed the retrofitted SES system and the eject box but the system wasnīt recognized in inpa. i plugged the 54pin connector and the cream antenna connector. what do i have to do with the unwrapped purple facra and the former used "antenna" style cable? thanks alot for your help |
#16
|
|||
|
|||
Quote:
and can you tell me what's your ride and which year is it? |
#17
|
|||
|
|||
TCU:
Car: 330i build 06/2002 actually iīm out of fuses , so i have to wait till tomorrow to buy some new fuses. |
#18
|
|||
|
|||
My friend i do beleive that ur TCU is defferent and you need to figure out the wiring 4 it.. this means u need to build an adapter after u get the wiring map right.. ill try to search 4 the pinout 4 it, do you know which car mobel and you get it from?
|
#19
|
|||
|
|||
It is different to other TCUs i have seen:
sadly the VIN was removed, so i just found: sadly my favourite wiring diagram site is offline, otherwise i would have searched myself about rewiring. |
#20
|
|||
|
|||
So far its clear that the fuse burns becouse 1 of the 3 power wires get shorted when u connect the cable.i'll try to check the wiring for everest TCU. Hope ill get something
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|