Dyanvin N6 NAV issues

[twinspool]

Wasup boys.. I recently acquired a new to me, 4.8is that was equipped with the aforementioned. And although it is a neat addition there are some issues with it and I was hoping I could get some guidance in here as I couldn't source anything in the Dynavin manual online and here (could be my search word choices)

When I press the button for the NAV, it starts to run and then BAM! an error pop up msg appears in another language and I am not sure what the issue could be.

Has anyone else experienced this and if so, what did you do to rectify it?

I did notice a mini SD card in the NAV slot, which I removed and reinserted probably just to excercise my fingers but that didnt help.

Thanks in advance!

[e39_touring]

That error is because the sd card is not being read. The card slot is sort of chinsy and wierd. iirc, on the bottom slot, the sd card contacts have to face up. And, even though the card feels like it's in, it's not. Use a small flat blade screwdriver to gently push the card in further until you feel it click, then give it another shot.

[twinspool]

Originally Posted by e39_touring

That error is because the sd card is not being read. The card slot is sort of chinsy and wierd. iirc, on the bottom slot, the sd card contacts have to face up. And, even though the card feels like it's in, it's not. Use a small flat blade screwdriver to gently push the card in further until you feel it click, then give it another shot.

wow bud thanks for this.. I will try that out later.. i appreciate the feedback..


10.30.17 update: Attempted the above approach and still no dice = no NAV... I think I will try holding the SD Card in with the screwdriver and running the NAV. If that works, that means I may have to McGuyver it in there. If not, based on a convo with the gent over at J&T, I will need to buy a new SDC.