Home Forums Articles How To's FAQ Register
Go Back   Xoutpost.com > Electronics > Mobile Electronics Forum
Arnott
User Name
Password
Member List Premier Membership Today's Posts New Posts

Xoutpost server transfer and maintenance is occurring....
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management


Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 04-18-2020, 07:56 AM
Member
 
Join Date: Feb 2020
Location: Czech Republic
Posts: 6
TonyW1967 is on a distinguished road
Combox replacement

Hi All, not sure if I'm on the right forum, but I have a 2011 BMW GT 530d and a while ago, lost a lot of functionality between my phone and the car - I can still take/make calls, but many of the other functions have been lost.


I did a bit of research, and believe the combox needs to be replaced, so I purchased a used (working) combox from eBay, but before I attempt to fit it, I have a few questions;


The Combox (Telematics P/N 9257151) was removed from a 2013 BMW 1 series - it's the same P/No, and the seller assured me it is a cross-fit, so should function. I believe that although the unit is coded to a different car, the functionality should be fine, but it won't work with BMW Assist - I'm not worried about that, it's not something I need.... so, it shouldn't need re-coding.


BUT, I have also read that there could be possible issues - USB might not work, the Combox could be 'constantly powered up' (the Network stays awake) which could drain the battery or set the alarm off, and finally, that the replacement Combox might need to be exactly from the same year as my car.


Any advice would be gratefully received!
Reply With Quote

Sponsored Links

  #2  
Old 07-29-2022, 07:52 AM
Member
 
Join Date: Sep 2016
Location: Massachusetts
Posts: 1
Chubs is on a distinguished road
Hi Tony,
This is an old thread but I was interested to know how it all worked out for you? Did you recode the module? I am chasing a MOST failure now (SOS error , No Audio, No bluetooth) and I believe it is my TCU 1.5 that has failed. Used modules are $25-80, I assume I will need to code them with my Vin but I haven't the tools to do this yet. Im pretty sure its not so difficult to setup DCAN + WinKPF or Bimmerkeeps protocol. Im also sure I can find a local person to code it for a reasonable fee. (Northern Va). I am comfortable with diag tool but Im fearful of bricking my car with an incorrect coding tool. I also don't have a battery stabilizer. Is there a low cost battery stabilizer out there?
Reply With Quote
  #3  
Old 07-30-2022, 03:55 AM
Member
 
Join Date: Feb 2020
Location: Czech Republic
Posts: 6
TonyW1967 is on a distinguished road
Hi there, well, in the end, it turned out that a simple software upgrade did the trick - happened by chance, I took the car in to BMW for routine maintenance, and while it was there, they did a full software update, and my phone was able to fully interface with the car!
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On





All times are GMT -4. The time now is 01:59 AM.
vBulletin, Copyright 2024, Jelsoft Enterprises Ltd. SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.