Business CD Removal

[rebound]

Ok, I'm installing my new IceLink Plus, and I need to remove the Business CD to make the connection in the back of the radio, but I can't figure out how to remove it?!? I saw the article on installing the IceLink, but when I pull off the volume knob, there is no "small grub screw" underneath. How do I get the darn thing out?

[benathon]

Once you pull the volume know out; there is a small hole for a torx screw. You turn it counter clockwise to pull it out. Then there will be two torx screws that need to be loosened thats visible once you disconnect the MID.

[avonside]

Here is the link to an article explaining how to remove the cd, it is very easy.I did my Aux input last week.

http://www.xoutpost.com/articles/x5/s...bluetooth.html

[phuksi]

You are working on X3 with Business CD? Attached a few documents that might help

- p

[rebound]

Originally Posted by phuksi

You are working on X3 with Business CD? Attached a few documents that might help

- p

Now this should do the trick! Thanks!

[stylesx]

Why is there a need to remove the business cd to connect it to the back ??? when you can use the CD Changer cables located in the center bucket or am i wrong ?

Thanks

[Tom G.]

Depends on where the kit was purchased. Overseas kits used the R40 Quadlock harness, while the US kits used a different CD Changer harness.