IceLink on NAV screen

[cwilliams21]

Thanks for the firmware!! I reflashed the firmware but as I do, it tends to stops at mp3 #159 out of 581. I attempted it twice with the same result..Is that normal? I would imagine it would go all the way up to 581.

Thanks again!

[UCrewX5]

Originally Posted by cwilliams21

Thanks for the firmware!! I reflashed the firmware but as I do, it tends to stops at mp3 #159 out of 581. I attempted it twice with the same result..Is that normal? I would imagine it would go all the way up to 581.

Thanks again!

Mine only showed to #99 and then completed. It should show the firmware version on your iPod when you plug it into the IceLink connector

[cwilliams21]

Yeah that's cool. Well I get the same results, no text on LCD .. I'll keep pluging away at it and post the fix if there is one.

Thanks for your time!

[Tom G.]

Originally Posted by cwilliams21

Yeah that's cool. Well I get the same results, no text on LCD .. I'll keep pluging away at it and post the fix if there is one.

Thanks for your time!

You're playing the files from the iPod - the ILP is not going into flash state. Here are the procedures:

1) Turn on iPod (do not connect to ice>Link).
2) Scroll over to the Start_update.mp3 file. This is usually in the Music>Genres>_Config>All>Update folder.
3) PLay the specified file, it is 0:59 seconds long, the iPOd will need to be connected to the ice>Link within this time.
4) Turn the key to the "on" position and select CD Changer/iPod mode
5) Connect iPod.
6) DO NOT DISCONNECT the iPod or turn off the radio while in the updating process, this will take about 5 minutes to complete, it will reboot the iPod when completed. The tracks will count from 1 to 99 in this mode as well.

Let me know if you need additional assistance!