|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Dib's Stealth Box designs
Hi all,
I have been searching for a while now, but couldn't really find anything in terms of a design and dims for a stealthbox, so I decided to create one. This site has helped me tons over the past couple of months, so here is my contribution... ![]() I had a bit of time on my hands yesterday, so I measured the rear compartment and came up with these 2 designs. Both designs were made with the average guy (or gal - yes, i just used hick jargon - i grew up in calgary...) like me in mind. They should both be fairly simple to build and there are no fancy cuts involved. The first is a box that has a deep base at the bottom to fill that cave inside the compartment. It also adds about .03 cu.ft internally for more air - I would suggest this if you are using a 10" shallow mount sub. The second one is a simple little box that would need a little more securing (brackets, etc). It is quite small and I would only suggest an 8" - I have heard the infinity 8"reference sub in a box this size and it pounded well... btw - the angled piece at the back shows 11" - this is approximate - it will probably be slightly smaller... These designs are for reference only - adapt them however you want - there is still plenty of room left in that compartment - again, I designed these with the simplest contruction in mind. And remember - always double check the measurements!! Measure twice before cutting and all the best to those who want to try these out... Ok - I don't have the tools to do these myself right now, so I'm hoping some of you will be willing to try these out and let me know. I plan to try and sort out making my own soon enough and I will post pics and results... Last edited by dib; 09-24-2008 at 01:41 AM. Reason: adding jpg |
|
#2
|
|||
|
|||
|
Thank you
DIB,
Thank you. I also plan on making a stealthbox and really appreciate the dimensions you provided. When finished, mine will be slightly different and protruding into the trunk space a bit becuase I plan on putting a JL 10w6 in it. This gives me a place to start. -TC |
|
#3
|
||||
|
||||
|
dib, thanks for this contribution. Lots of folks have asked for dimensions for making a sub box for the X5 and this should get them going in the right direction.
TC - Welcome to the forums.
|
|
#4
|
||||
|
||||
|
nice - i just checked in and realised there was some feedback. TC I'm glad this has helped you - make sure you post some pics and feedback when you're done!
please feel free to pm me with any questions - I'm just in the process of having the 'with base' version made for mine - i'll post pics and some follow ups soon enough... btw - i'm adding a detailed drawing of my final box with cutout dims for the 8" sub (the hole at the top is for a 2" speaker wire terminal)... Last edited by dib; 09-24-2008 at 01:45 AM. |
|
#5
|
||||
|
||||
|
Quote:
|
|
#6
|
|||
|
|||
|
The pioneer sub in the other thread requires a 23.8 cm (9 1/3") hole to be cut. So i think that will fit.
|
|
#7
|
||||
|
||||
|
Quote:
|
|
#8
|
||||
|
||||
|
Quote:
|
|
#9
|
||||
|
||||
|
Quote:
I still havent made up my mind, me and my wife are expecting our 3rd born this summer and im torn between trading in my e53 and get an e70(w/ 3rd row seats) or e53 + Sienna(easy access)? if we keep the e53, i have a lot of mods on the line: custom sub, decorative skid plate, LED license plate lights, carbon fiber door trims...
__________________
"Lapit mga kaibigan at makinig kayo, ako'y may dala-dalang balita galing sa bayan ko Nais kong ipamahagi ang mga kwento at mga pangyayaring nagaganap sa lupang ipinangako..."
|
|
#10
|
||||
|
||||
|
Quote:
I designed it with slight allowances on the sides (outside of the box vs inside the X5 compartment), so, technically, if you want to put a 10" sub in, you might be able to increase the width slightly and it should work. The only concern would be to obviously use a shallow mount sub (I had originally looked at the Alpine 1043D - 4.3" depth), but moreso than that is to make sure it will be ok in a small volume box (about 0.35cu.ft.). I designed it with the Infinity Reference 8" sub (REF850W) which sounds great in a small enclosure that size. I believe you wanted to know about the 1" lip at the back - honestly it was there because in my X5, theres a bit of a metal lip seperating the two compartments, so this was there to stabilize the whole box. So, interpret it however you want (you can place it anywhere under there) - make sure you cross reference my measurements with your X5 (every one is going to have variations on their interior dims) to confirm that it all works... And please post pics of your finished box!! thanks for the interest... ![]() dib. Last edited by dib; 01-29-2009 at 07:39 PM. |
![]() |
| Bookmarks |
|
|
|
|