Subwoofer Project FINISHED!!! (Enclosure Dimensions Included)

[Essam Khafagi]

Finally I decided to pull the trigger!

Information:

Subwoofer: Pioneer Shallow 25cm (10") Sub TS-SW251
It only needs 0.35 cu. ft. enclosure
http://www.pioneer-uae.com/product_d...cat=1&subcat=4

Thanks zerochief for the idea http://www.xoutpost.com/x5-e53-forum/...stom+installed



Amplifier:
Alpine MRP-M350 1 Channel V-Power Class-D Mono Amplifier
700W Max - 200W RMS
http://www.audiogearreviews.com/revi...ne_mrp-350.asp



Enclosure
After several attempts using cupboards, I came out with the below design and dimensions. This should roughly give 15 Liters of volume (0.53 cu. ft.) which is higher than the minimum recommended enclosure volume for the sub.

I will start installation after the carpenter finishes the enclosure. I will keep you updated with the results.

You will find the design and dimensions of the enclosure on the following posts....