|
So how are you guys mounting the deck? My current bezel has the brackets as integrated parts that cannot be removed, so all I had to do was slide in the deck from the rear and use the stock screws in the side of the deck. I see fe did some brackets on the side of the deck, but how in the heck are they secured to the bezel itself then?
Also, the opening gaps around the top and bottom are larger than the size of the deck face and/or the entire deck itself. I looked back at the initial pics of this entire thread and the same gaps/openings are in fe's pictures as well, I just never noticed it. Both bezels sink into the dash the same equal distance, so it's definately not perfectly flush like the pic above with the tan interior. That's the least of my problem, and I'm fine with it sinking in anyways. I was playing with the new bezel in the dash and I can push the bottom in a little, tip the top forward and even get more angle on the deck...I just don't know how in the hell to mount it?
I was so excited to be able to install and start using this, but I have no way now of securing the deck to the bezel or the opening in my dash. Suggestions?
__________________
650hp 10 X5///M - Stage 2, Vibrant 1794's , gutted cats, custom intake, AC Forged 22's 325hp 98 BMW 740iL - ///M5 6spd, www.bavengine.com w/ Performance Option, electric fan, CF intake tube w/ heatshield, Mag 14816 w/ notched bumper, Bilstein/H&R Stage II/Powerflex 600+hp 02 Harley F150 - MHP900 Stage 3 engine, KB2.3, 8# lower, 60# inj, Walbro FP's
135hp 01 TL1000R - M4 full exhaust, K&N, Yosh box, -1/+2 gears, 2CT's
Last edited by m5james; 08-16-2010 at 05:57 PM.
|
08-16-2010, 05:27 PM
Threaded Mode
