Running speaker wires to the radio is one option, depending on if you have premium sound or not, you should only wire up 4 speakers to your radio.
Quote:
Originally Posted by BoostedA4203
ok so ive been searching everywhere for info and have finally decided to go ahead and take the plunge..i have a pioneer avic f90bt and was under the impression that i could use the stock amp because i dont have DSP...basically all i did to try and see if things would work was disconnect the wiring harness from the radio module in the trunk and then connected it to the avic via wiring harness adapter...the radio fired right up but didnt get any sound...so what im wondering is will my only solution to be to bypass the factory amp by tapping into the speaker wires on the harness that leads to the amp? I really wanted to avoid doing this...any help would be great!
|
__________________
2003 BMW E53 X5 4.4i - M62 engine (Non Sport with Premium and Cold Weather Package)
Color: Steel Gray Metallic
Mods:4.6is Exhaust (Pipes, Mufflers and chrome oval tips) BMW Sport package Taillamps, BMW Tire Valve Stem Caps
Medium tinted front windows
JVC HD Radio
Alpine 4x100 channel Amp
Orion 600W Mono HC Amp
Three 12" Sony Xplode in subwoofer enclosure
|
01-11-2010, 12:40 AM
Threaded Mode
