|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#61
|
|||
|
|||
|
Sponsored Links | |
|
#62
|
|||
|
|||
Your software version is 3-1/21 (v2.1) and VERY VERY old.
Before you do anything else, upgrade your software. The latest version is 3-1/63 (v6.3). It will make many problems go away. and it will give you much nicer, smarter looking graphics. Totally different look, much more modern. The Telematics screen is in the Service Menu. To access the Service Menu select Set, then press and hold MENU until the Service Menu appears. Then select Telematics, this is where you see the settings that NavCoder programs. |
#63
|
|||
|
|||
Thank you so much....my unit didnt come with an OS disk can someone point me in the right direction please on where to find the software and a procedure to do this, are any of these versions ok from here http://www.xoutpost.com/articles/all-...ng-system.html
I'm downloading a file called V21.1 clone CD.rar Im assuming I need to unrar and burn image using clonecd.....one more question to boot from CD is it amatter of inserting CD and should auto boot? Thanks Quote:
Last edited by crows; 02-22-2007 at 03:09 AM. |
#64
|
|||
|
|||
Mk3 OS CDs
For the Mk3 any OS disc newer than v22 has the last version (3/1-63) on it.
Cancel your v21.1 download - that contains 3/1-62. See versions here: http://www.bimmerboard.com/forums/posts/29257 You need v22 or later. Once you have the image, burn the CD with it using your favourite image burner Note: BEFORE you insert the CD into the Mk3 nav, you MUST verify it is a Mode2 CD - use Nero InfoTool or any other CD tool to check the CD mode. If you try and load the OS from a mode1 CD, the Mk3 will hang and won't boot. Loading process: Turn ign to pos1, let nav system boot up to display menu Eject map CD Insert new OS CD, follow on-screen instructions. DO NOT turn ign off during load process. Tip: try this process on the 2nd Mk3 - you may fix it with a new OS version |
#65
|
|||
|
|||
Bugger those links are not working for me. I'm downloading 24.1 or v26 that looks like should be ok.
Quote:
Last edited by crows; 02-22-2007 at 04:14 AM. |
#66
|
|||
|
|||
It certainly works with vista....no problems....
Quote:
|
#67
|
||||
|
||||
Which upgrade do I need if my nav shows that I have 'SW 3-1/40'? Where can I obtain a copy?
__________________
<<2008 X5 4.8i Titanium Silver Metallic> .<<2002 X5 3.0 Titanium Silver>> |
#68
|
|||
|
|||
Quote:
http://www.bimmerboard.com/forums/posts/29257 You need v22 or later. Once you have the image, burn the CD with it using your favourite image burner Note: BEFORE you insert the CD into the Mk3 nav, you MUST verify it is a Mode2 CD - use Nero InfoTool or any other CD tool to check the CD mode. If you try and load the OS from a mode1 CD, the Mk3 will hang and won't boot. Loading process: Turn ign to pos1, let nav system boot up to display menu Eject map CD Insert new OS CD, follow on-screen instructions. DO NOT turn ign off during load process. |
#69
|
|||
|
|||
Kiwi how close is your next release with the option of disabling tv in motion mode.....would it also give you the ability to enable it again?thanks for this great little application.
Last edited by crows; 02-27-2007 at 09:02 AM. |
#70
|
|||
|
|||
Do you explain me to thing it serves the button " SET BITS" IN NAVCODE 1.2.1 ?
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|