NavCoder 2.0.17 released - Page 3

X5 Meister · #21 03-16-2007, 11:01 AM

Yes. You need to supply +12 volts and ground.

Quote:

Originally Posted by jammykam

As far as I know it doesn't matter where you pick up the iBus wire from. You also need to supple +ve and -ve to the board, so bear that in mind.

Kam

Sponsored Links

MrX30si · #22 03-16-2007, 02:00 PM

Quote:

Originally Posted by jammykam

As far as I know it doesn't matter where you pick up the iBus wire from. You also need to supple +ve and -ve to the board, so bear that in mind.

Kam

Thanks for the info!

KiwiJochen · #23 03-16-2007, 03:20 PM

Quote:

Originally Posted by tweakerwes

Is it now possible to add dutch language in navcoder?
Since V29 has dutch language in the update?

Now my car is in ducth and i want to use navcoder for tv in motion.
But im scared that i gonna loose dutch language?

Hi Tweaterwes,

the only way to change the language is to select "Code Language".

So you can code your TV with no impact on language whatsoever.

But you can help me too - i want to know what the numeric language code for NL is - please can you use NavCoder, select "Read Language" and then send me the ibus messages that appear in the main NavCoder window.

I can then see what numeric language code represents NL, and add it in to NavCoder.

Jochen

Malaspina · #24 03-16-2007, 03:51 PM

Quote:

Originally Posted by sucker69

Is this connector actually plugged into the back of the CD changer ?
I would like to see a picture of where it is connected, if possible ?

It is the left side connector. It has three pins, 1 is Ground, 2 is 12V and 3 is I-Bus. Pin 1 is the righmost pin in this picture.
The three pin connector that fits into this three pin socket in the CD changer should be disconnected from the CD changer and connected to the I-Bus interface device.
Name: IMG_1726 small.jpg
Views: 1274
Size: 220.7 KB

Name: IMG_1726 small.jpg
Views: 1274
Size: 220.7 KB

tweakerwes · #25 03-17-2007, 10:38 AM

@kiwijochen:

Is this the ibus code that you wanted:
00 00 89 81 86 00 89 81 86

Facelift · #26 03-17-2007, 01:38 PM

Quote:

Originally Posted by KiwiJochen

All bug reports, requests etc back to me.

I still have a 'runtime error 380 : void property value' on vista.

KiwiJochen · #27 03-17-2007, 03:05 PM

Quote:

Originally Posted by tweakerwes

@kiwijochen:

Is this the ibus code that you wanted:
00 00 89 81 86 00 89 81 86

Perfect, Dutch is language number 9 !!

Thanks

Cap_Nemo · #28 03-17-2007, 05:14 PM

Well as you think KiwiJochen we shall solve a problem with a unblocking tv on hybrid modules of 2007-06 of release?

KiwiJochen · #29 03-17-2007, 06:04 PM

Quote:

Originally Posted by Cap_Nemo

Well as you think KiwiJochen we shall solve a problem with a unblocking tv on hybrid modules of 2007-06 of release?

NavCoder works with hybrid modules in ibus cars (E38,E39,E46,X5,X3 etc)

I do not have a MOST-based vehicle so have no ability to work on them

Cap_Nemo · #30 03-17-2007, 09:53 PM

Quote:

Originally Posted by KiwiJochen

NavCoder works with hybrid modules in ibus cars (E38,E39,E46,X5,X3 etc)

I do not have a MOST-based vehicle so have no ability to work on them

I have understood that it is a question about i-bus modules, but I tried to do a unblocking on the module of 2006-7 of release, the TV in movement does not work!

Sponsored Links