|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
V31 upgrade problem cd key needed
Iīm with a big problem in my 530d E39,I tried to upgrade the navigation software but something ran really badly. I have a MK III navigation drive with V16 software on a 16:9 display , I tried to install the V31 software in order to update my system , everything ran fine till the end,but when the system reboot said this: "insert key CD or system 17". now the display only shows this ,all the other functions works fine but the display shows this message all the time. I think I need a key CD for this V31 version, I think this is because I had V17 prior version,I tried to search on the internet for this key but apears to be impossible to find it. Iīm very sad about this because I tried to improve my system with a new firmware,but instead I messed up. I was on the bmw local dealer and they told me they donīt have any software discs to sell,only navigation cd maps. I removed the GPS drive from the trunk to see if there is any reset button but I didnīt found it. at the same time I tried to leave the drive disconnected from the car for about 2 hours to see if reset for it self,but once again didnīt result. I know my gps MK III itīs good,but I canīt solve this situation,I donīt have any key to unlock the system,I think I have to buy a new gps drive,but they are very expensive. I ask for someone to help me, I donīt know what to do, put this drive on the trash ,and buy a new one , or try to unlock this,but how can I do it? any help please? thanks very much,and sorry for my english. regards |
Sponsored Links | |
|
#2
|
||||
|
||||
__________________
Xoutpost.com - where you come for the information but stay for the friendships |
#3
|
|||
|
|||
thereīs a place in heaven for you.
thank you ,works fine. two more question: 1š - before do the upgrade I had the V16 version , with this version everytime I started, the BC display under the gauges initiated with the computer data and all other stuff automatically,but now after install the V31 version this display is allways off,and I have to press the BC button to turn it on when i start the car,the display Iīm talking about is like this image (between the arrows,under the temperature),is there any thing I can change I order to put this displaying automatically? 2š - I heard that I can enter the service mode on the 16:9 screen to change several settings like bright display and other functions,I tried everything to enter this menu,but I was unable to find it,Iīm using the MKIII computer,what I need to do? thank you very much in advance. |
Bookmarks |
|
|
|