|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Navcoder works but doesnt program...
hooked it up and i see all kinds of ibus traffic phone nav rad etc.. its continuous good sign right? wrong when i try to code or run the nav/audio i get constant timeouts i cant do a thing with this software what so ever i tried getting a better ground as suggested by a few here nada i even hooked it to the battery neg nada tried several other ibus connection like on the vidio unit, cd changer etc. i even tried to move the com port around as someone else suggested com 3, then com 2, then com 1, then com 4.... nada my laptop does not have a serial port so i used a pcmicm to rs232 com port i also used a usb to rs232 com port everything i do is the same,, only other thing i can do is: bring my desktop into my trunk of my car and the monitor my desktop has a com port. but i will now need another serial key.. what do i do? buy a new one? |
Sponsored Links | |
|
#2
|
|||
|
|||
Talk to me, not the world
|
#3
|
||||
|
||||
does this SW allow me to program things like mirror fold it when parking...door auto lock when driving !!
__________________
2008 BMW X5 4.8i Navigation Bluetooth Rear Entertainment Aerodynamic kit DVD, CD, TV Projection |
#4
|
||||
|
||||
Quote:
It's an amazing bit of software to do what it currently does IMHO. Got me out of a scrape with my Nav coding, and has allowed me to do something my dealer claimed was impossible without spending somewhere near £800, and that was to enable Voice Recognition on my Bluetooth module. |
#5
|
|||
|
|||
If you are viewing the data fine, and it is appearing without errors, then the ibus to COM port receive is OK
But if you cannot talk to anything, then the COM port to ibus is not working When NavCoder sends a command, it appears on the ibus and appears on the NavCoder screen. So watch the bus data when you send a command - do you see it? If you don't, check the interface! Common problems: Interface fault Tx line not connected Another device is using the COM port problems with USB-to-Serial converter |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|