|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
NO VOICE on nav retro Z4 ????
I don't get any voice nav guidance when in nav mode. I have the GB Female voice selected. Any ideas of what to check? Jim |
Sponsored Links | |
|
#2
|
|||
|
|||
Check the audio output from nav drive to the radio (in the dash), that it is cabled correctly and connected to the right pins
|
#3
|
|||
|
|||
OK, if you used the retrofit loom, the voice goes direct to pins 5 & 11 of X13598 on the radio.
These wires were branches A7 and A8 on the retrofit loom, and you had to connect them into the connector on the radio. Wire colours: Yellow/red = Voice positive Yellow/brown = voice negative |
#4
|
|||
|
|||
Hi,
Yes I used the OEM wire bundle loom and I'll recheck that I placed those two wires into the correct location in the radio connector. I'll let you know how that check goes. Thanks Jim |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|