Quote:
Originally Posted by AlanD
need a little help guys.
got some help to finish off the installation on my sat nav - a mechanic i know tapped in the wires for me.
is there anyway to test the dead reckoning / reverse sensor?
ive checked in the service menu and see
wheel sensor - 0
direction - forward
the above is regardless of movement etc
does this mean its installed wrong? is there anything to test etc
|
The Service Menu is the correct way to test the speed pulse.
The fact that it always shows 0 means that the speed pulse wire is not connected. Check the speed pulse connection.
At the same time, check the other important wire for dead reckoning - the Direction of Travel.
This will show Forwards in all gears apart from reverse. In Reverse, it will show Backwards
If the Direction of Travel is also not working, it indicates that the installer did not connect the Auxiliary Loom, which provides the speed pulse and the reverse signal.
07-11-2010, 06:14 AM
Threaded Mode
