|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#61
|
|||
|
|||
|
Sponsored Links | |
|
#62
|
|||
|
|||
Quote:
|
#63
|
|||
|
|||
Free programmers, similar to FlashIt?
Hi, are there any free tools similar to FlashIt that will accomplish programming the 29F400 chip without having to remove it?
Also is there a suitable hardware (USB/serial) device for doing that? I'm going to programme my BM54 Back to be a BM54, but am leaving the old round pins circuit in place. Pins like telephone in are mapped through to the 10-pin connector, which is what I want (ULF to car stereo speakers). Thanks! |
#64
|
|||
|
|||
That will not work. If you put the firmware upgrade on a back unit, you will lose the sat Nav voice.
|
#65
|
|||
|
|||
Hi thanks for your reply, can you explain why that would happen?
Last edited by Chalky; 03-01-2016 at 04:27 AM. |
#66
|
|||
|
|||
I am not sure why. It's just the way it is.
|
#67
|
|||
|
|||
Crazy stuff. I will try this myself when I do it. So you did this and discovered for yourself? Cheers.
|
#68
|
|||
|
|||
I've done 1000s of bm54 upgrades. A guy wanted auxiliary input on the Back unit and so I did the firmware upgrade, which worked, but no sat Nav voice. It would lower the volume of the music, but nothing comes out. I would also assume, that the tv sound would not work, as it shares the same input on the bm54 back.
I never tested the Back with regards to audiotext from an MP3 changer. No point I guess, as if you can't have sat Nav voice, then there is no point IMO. Better off buying a flat pin bm54, more options and more use of the firmware upgrade, with dynamic routing, auxiliary iD3 tags, better radio control etc. The amp upgrades are the first port of call on these units. No point of doing anything with a ticking time bomb on the IC amps, which fail and are the worst sound quality in any car I've ever been in.
__________________
[email protected] |
#69
|
|||
|
|||
Hello guys!
My bm54 unit had lots of distortion and squealing noises! I've already do the amp upgrade, but the problem persists. Maybe it's something about the processor chip? Anyone could help me? I'm from Portugal, so it's difficult to send the unit. If you could try to help me through message that would be perfect.. I just need to know if anyone has experienced that problem and how to repair it (which part is deffected, etc) I've already made the firmware update, de-soldering flash. It makes any difference if I try to reprogramme it with red plug on the board? Thank you so much in advance! |
#70
|
|||
|
|||
Hello evryone who works on this thread!
I've just bought the bm54 back 65126933455. my car is '03 46. and it has mb54 prof. but it died. so i want to make a transformation like mad_presley and have some questions. Would be very glad if you know and share you knowledge 1. as i dont have dsp i need a dump of 29f400 frrom bm54 which was factory intaled in non dsp car? or it doesn't matter? 2. rad all the topics but didnt fined sure info if bluetooth will work correct with this upgrade of bm54 back. does anyone know for sure? |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|