|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
01-28-2011, 10:33 AM
|
|||
|
|||
|
I think it is not SW, but HW problem. MK4 turns on, if there is i-bus traffic. If you unlock the car, the red led must light. If it doesn't, it is the failure of the power supply or power part on the mk4 main board. The worst case, when an mk4 does not turn on even when you turn on the key, only when you press the eject button. Tricky sellers are selling these units with short-cutted eject button, then if you connect the mk4, the menu is shown, but the unit never goes to sleep mode, and drain your battery at 1 night. :-(
__________________
Bombolo 
Last edited by Bombolo; 01-28-2011 at 10:43 AM. 
|
|
#2
01-28-2011, 10:41 AM
|
|||
|
|||
|
well i got mine for $185.. so it was a deal still
 I got it working 1/2 way.. still doesnt boot up when the car is unlocked (red light doesnt turn on, need to have keys in ignition to eject a disc even).. I jammed the eject button open for about 12 hours, did some driving inbetween. When I did that, it worked nicely, booted up when car door opened.. settings kept.. after i pulled took the wire i used to jam the button down, it seems now to be able to keep its settings... it still isn't turning on when unlocked, but at least the settings stay, remembers my last location in the nav, etc.. Good enough for me! (at least until I have more time to figure out the HW issue.... too cold out there to do work!) try that and see if it manages to fix the settings issue..
|
|
| Bookmarks |
|
|
|
|
Hybrid Mode
