Info and select buttoms

Agus · #1 01-03-2006, 08:01 AM

Hello to all. Ever since I upgrade to V. 26, I cannot use Info and Select buttoms, because they don´t work. Somebody can help me?
I have 16:9 navigation with MK4 and Radiomodule BM24.

Greettings, Agus.

Jackay · #2 01-03-2006, 08:43 AM

Hmm...there's actually functions behind Info and Select, while navigation's working... @@! I never knew that!

Agus · #3 01-04-2006, 07:57 AM

I believe that I have found the solution. I will prove it late this. If it works, I put it here. Greetings

chivas · #4 03-06-2006, 06:39 PM

did you find the solution?

nofri · #5 03-07-2006, 01:59 AM

Quote:

Originally Posted by Agus

Hello to all. Ever since I upgrade to V. 26, I cannot use Info and Select buttoms, because they don´t work. Somebody can help me?
I have 16:9 navigation with MK4 and Radiomodule BM24.

Greettings, Agus.

It´s ever the same... I have the same configuration.

The INFO and SELECT Buttons doesn´t work. Your MK4 is gone to the OEM Mode. Also the Assist-Menue is going out, the VIN Number is lost and the vehicle-type is 7´er instead of 7´er limousine.
You must contact your dialer and code the Mk4 to your car again. Or you can send a special string of bytes over the i-bus to code it manually. But therefore you must know the byte-construction of this string.
This solves these Problems.

regards
Norbert

Agus · #6 03-07-2006, 02:39 AM

Indeed in menu it leaves me that she belongs to a series 7. Anyway, which if I have found is menu on watch of the radio, but with another type of combinacion of keys. I will happen through the dealer to try to solve the problem of the buttoms

Thanks

CortinaD · #7 03-07-2006, 02:54 AM

Quote:

Originally Posted by nofri

It´s ever the same... I have the same configuration.

The INFO and SELECT Buttons doesn´t work. Your MK4 is gone to the OEM Mode. Also the Assist-Menue is going out, the VIN Number is lost and the vehicle-type is 7´er instead of 7´er limousine.
You must contact your dialer and code the Mk4 to your car again. Or you can send a special string of bytes over the i-bus to code it manually. But therefore you must know the byte-construction of this string.
This solves these Problems.

regards
Norbert

could it going into OEM mode through out the wheelspeed calculations or have any other ramifications other than menu items dissapearing?

nofri · #8 03-07-2006, 03:06 AM

Quote:

Originally Posted by CortinaD

could it going into OEM mode through out the wheelspeed calculations or have any other ramifications other than menu items dissapearing?

No, this is also an option and works only perfekt when the "show arrival time" is enabled through the coding of the car´s MK4.

eyesore · #9 03-08-2006, 12:52 PM

Quote:

Originally Posted by nofri

It´s ever the same... I have the same configuration.

The INFO and SELECT Buttons doesn´t work. Your MK4 is gone to the OEM Mode. Also the Assist-Menue is going out, the VIN Number is lost and the vehicle-type is 7´er instead of 7´er limousine.
You must contact your dialer and code the Mk4 to your car again. Or you can send a special string of bytes over the i-bus to code it manually. But therefore you must know the byte-construction of this string.
This solves these Problems.

regards
Norbert

What are the functions behind Info and Select in Navi-Modus? I have an X3 and if the radio is on, I can hit Info: shows TP and Nav-Min.

I have never lost this function while down- and upgrading.

Select?

Thanks.

best,

e.

Agus · #10 03-07-2006, 05:24 AM

If I downgrade my navi to V.21 and then turn on-off-on radio, could be play info an select buttoms? And then go to v.26 an turn on-off-on radio again?
Thanks