POISoN
 

Adding POI with sound alerts to you BMW MK4 nav system.
Proviso; this software is still in development and may give some interesting results while in use so please report any bugs or strange behaviour
You use this at you own risk.

Download POISoN.zip.pdf, remove .pdf extension then unpack ZIP archive somethere (c:\poison for example).
GKT+ runtime environmet must be installed to run poison.exe

A: OS Software modification
1. Open original V32 image with UltraIso.
2. Extract navboot file from CD image to c:\poison
3. Run patch.exe to add sound notification code.
4. Replace military base icon (romicons #216) to something you like.
5. Put modified navboot file back to CD image.

B: Voice modification
1. Extract voice file from V_2/Voices/0506 (gb_f.csf for english)
2. Edit voice phrases #8 #9 using NavSpeak utility, for example: 322,323,88,250,191 (high beep, low beep, a pause, attention, ahead)
3. Put modified voice file file back to CD image.

C: Force SW upgrade
1. Extract sw_rel.tbl form CD image
2. Use hex editor to change first 4 bytes from '1000' to '1001' to force upgrade.

D: Force Voice upgrade
1. Create directory /V_2/Voices/0507 in original disc image and copy all files from /V_2/Voices/0506 to it
2. Copy voice.lst file from poison zip archve to /V_2/Voices/0507
3. Copy lng_rel.tbl file from poison zip archve to /V_2/RR/0101/BMWC01S first 4 bytes in lng_rel.tbl must be the same as in sw_rel.tbl

Burn CD and upgrade the system.

E:Adding POI to map database:
1. Copy map database from CD/DVD to the hard drive (bibliogr and carindb files are enough fo CD, bibliogr and DB folder for DVD maps).
2. Run poison.exe, open map folder (folder where bibliogr file located)
3. Add your own POI or import from plain lon/lat txt or csv file.
Take a look at http://www.poiplaza.com/index.php?p=...pg=ds&lsts=616
You can use: iGO 8 txt, iGo txt, GARMIN csv, destinator asc, mio asc, navigon asc, route 66 csv and tomtom asc files from there.
4. Save modified database
5. Insert modified database (carindb file of DB folder) back to image using UltraIso.

Note: Don't create new disc from scratch, it will not work.

F: Burn the disc.

Thank's Nomad!!!! Finally you've done this!!!!!


Now let's test it!!!

Nice Work Nomad,

Please remember when burning your discs, to burn at either 1x speed or the slowest rated for the media you are using.

Also use the Update procedure when upgrading your mk4.

Goto the car open the drivers door,
Goto the nav computer and press eject on drive,
Eject the map disc,
Switch ign to pos 1, leave door open.
Insert firmware disc into drive, follow instruction on nav screen.
Wait (approx 6 mins) until the nav computer ejects the cd
Then confirm reboot.

Do not switch off ignition or close the door when doing the upgrade.

Then Insert modded map disc.

NOTE: Extra stuff needed to get it all working, in case it's not obvious.

GDK+ Libraries
Navtweak
Navtweak

Imgburn: The Official ImgBurn Website (or similar)
UltraIso: Download site (or similar)

POI DB, Take a look at poiplaza

NOTE Update 24-02-10.

If running windows7 then you need to run 2.14.7 (gtk2-runtime-2.14.7-2009-01-13-ash) of the GDK+ Libraries for the poision.exe to work.

Navtweak (both 2.6 and 2.7) need 2.16.6 (gtk2-runtime-2.16.6-2009-12-01-ash) of the GDK+ Libraries to work.

You can have them in 2 separate dirs.

Call me noob, but where can I find navboot file (2. Extract navboot file from CD image to c:\poison)??

I don't see it on my V32.ISO

/V_2/RR/0101/BMWC01S/app_sw

You need to open the v32.iso with something like ultraiso and then navigate to the dir above.

http://i169.photobucket.com/albums/u...1/navboot1.gif

Remember to make the file read/write (or you can't make changes to it).

Get an error from Poison.exe :

"This application has failed to start because libgdk-win32-2.0-0.dll was not found. Re-installing the application may fix this problem."

Thx i see directories from 0101 till 0103. I have a MiniCooper S do I need another bootfile? I succeeded with patching. Replace military base icon (romicons #216) to something you like. - Where can I see this icon? Will this be visible when starting the navigation computer? I would like to maintain the original MInI Cooper logo if possible :)

Try this version i had no problems whatsoever; http://sourceforge.net/project/showf...ease_id=561910

You need to get a newer version of the GTK+ libraries

http://gtk-win.sourceforge.net/home/index.php/en/Home

2.14 or above I think

The mini mk4 is the same as all the other mk4's so use the one in the 101 dir.

Use navtweak to open the navboot and the scroll down until you get to #216 and the "replace" with the camera icon.

yes, the cameras will be on all the time, no need to select as a POI, in fact you can run another POI as well, I will be running Mobile camers (with no sound).

Unless you change the spalse screen yourself it will be the same.