that was it, it works :) thx, nomad

Works for me too :) thx nomad Stil resort me for so far last question. I bought the PimpMyNav software because the POI's in the MiniCooper are different than in a regular BMW. According to the coder of that application. So will the POI show up on MiniCooper as well? I tried once the navigation disk with POI's for BMW in my navigation and there were no POI's visible. After that in a BMW MKIV system POI's were visible. This means the folder is different for those two where to save....

I"m very curious if somebody has it working already :P

I just tested it, it works like a charm

http://www.youtube.com/watch?v=sKpuCwdSw6c

http://www.youtube.com/watch?v=Fee74cYQh6A

Improvement to instructions
 

Hi Nomad:

> C: Force SW upgrade
> 1. Extract sw_rel.tbl form CD image
> 2. Use hex editor to change first 4 bytes from '1000' to '1001' to force upgrade.

Better is:
> 2. Use hex editor to change first 4 bytes from '1000' to '1010' to force upgrade.

Reason:
1001 is not visible (shows as 4-1/00) and thus you cannot verify the SW version is different

1010 is visible (shows as 4-1/01) and so the user can see that the SW has updated

No 1001 is visible like SW 4-1/01 and 1010 is visible like SW 4-1/10

Sorry, correct that said Jochen

Beautiful, Nomad a huge thanks from all the BMW fans in Italy.

PS: Will be it possible for MK3 ?

exactly

and what about E46's radio navigation?

Another BIG THANK YOU:thanks: to Nomad, KiwiJochen and everybody involved in this development from the Spain CARX BMW forum people