Xoutpost.com
Page 2 of 6 1 2 3456
Show 200 post(s) from this thread on one page

Xoutpost.com (https://xoutpost.com/forums.php)
-   Navigation System (https://xoutpost.com/electronics/navigation-system/)
-   -   Info and select buttoms (https://xoutpost.com/electronics/navigation-system/8920-info-select-buttoms.html)

nOOgz 03-07-2006 06:17 AM
"...if it comes truly..."

Yes, it does (sorry for the german names :rolleyes: ):

Teilenummer:
01 59 0 141 891
Benennung:
CD SOFTWARE NAVIGATION (MIT SPLITSCREEN)
Benennungskommentar:
SPRACHNEUTRAL
Zusatz:
V 27

Greetz

dave_p 03-07-2006 06:17 AM
Will the dealer recode the unit free of charge since I have messed about with the operating system?

eyesore 03-08-2006 12:52 PM
Quote:
Originally Posted by nofri
It´s ever the same... I have the same configuration.

The INFO and SELECT Buttons doesn´t work. Your MK4 is gone to the OEM Mode. Also the Assist-Menue is going out, the VIN Number is lost and the vehicle-type is 7´er instead of 7´er limousine.
You must contact your dialer and code the Mk4 to your car again. Or you can send a special string of bytes over the i-bus to code it manually. But therefore you must know the byte-construction of this string.
This solves these Problems.

regards
Norbert
What are the functions behind Info and Select in Navi-Modus? I have an X3 and if the radio is on, I can hit Info: shows TP and Nav-Min.

I have never lost this function while down- and upgrading.

Select?

Thanks.

best,

e.

sos528i 03-08-2006 02:29 PM
This issue mainly happens when you are running the old style BM24 radio, with a MKIV Nav computer. If you're running a BM54 radio with the flat pins then it's fine.

There this problem appears mainly on the Pre2002 cars that have had the Nav computer upgraded.

nofri 03-09-2006 01:37 AM
Quote:
Originally Posted by sos528i
This issue mainly happens when you are running the old style BM24 radio, with a MKIV Nav computer. If you're running a BM54 radio with the flat pins then it's fine.
There this problem appears mainly on the Pre2002 cars that have had the Nav computer upgraded.
This is a good explanation, exactly my configuration:
BM24, MK4, Pre2002 (11/2000)
This would also explain the different statements of different people.

Thanx sos528i !

b.w.
Norbert

sealbeach740 03-09-2006 02:28 AM
Getting INFO & SELECT buttons back....
 
Quote:
Originally Posted by sos528i
This issue mainly happens when you are running the old style BM24 radio, with a MKIV Nav computer.
There this problem appears mainly on the Pre2002 cars that have had the Nav computer upgraded.
That is my setup for my 2000 740i. I also lost my INFO & SELECT button functions when I upgraded to V26.09a. But, by going back to V20 (or V21, I've read), then back to V26, you re-gain your INFO & SELECT button funtions. Mine is fine now. :)

EDIT NOTE: My nav system was already in Euro mode (no accept screen, yards instead of feet....) so, going back to V20 & then to V26 again wasn't an issue for me. Just be aware that going backwards, then back up again does put you in Euro mode.

Roscoe 03-09-2006 07:51 AM
Quote:
Originally Posted by sealbeach740
That is my setup for my 2000 740i. I also lost my INFO & SELECT button functions when I upgraded to V26.09a. But, by going back to V20 (or V21, I've read), then back to V26, you re-gain your INFO & SELECT button funtions. Mine is fine now. :)
Does this also cure the problem with the ETA being calculated strangely?

stevel123 03-09-2006 03:32 PM
I lost the RDS details and the info button stopped doing what it did prior to the upgrade. I found that if I reinstalled an earlier version with the radio switched on and just before pressing ok to reboot the nav system, I switched off the radio by pressing the vol button and switched it back on again, then pressed OK to reboot, the info and rds were ok afterwards.
I then upgraded to the version I wanted and did exactly the same radio off / radio on and all was ok.

Not sure if this will help...but does no harm.
This does not fix the ETA issue which I have so I will get it recoded when its due for service soon.

GordonW 03-09-2006 05:03 PM
Hello!

Sealbeach, I also have 16:9 navigation with MK4 and Radiomodule BM24.
My info, select and some other buttons also dont work.

I want to try your option, but were can i find V20?

Thanx!

sos528i 03-09-2006 05:25 PM
You don't have to use purely version 20, just a lower version should do the trick...

http://bmwnavigation.com/software/Na...tware_Updates/


All times are GMT -4. The time now is 03:16 PM.
Page 2 of 6 1 2 3456
Show 200 post(s) from this thread on one page

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.