Xoutpost.com
Page 3 of 3 12 3
Show 200 post(s) from this thread on one page

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   Cam sensor (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/23921-cam-sensor.html)

Greg 08-24-2010 08:36 AM
Not necessarily so. I hooked up my Actron CP9135 and cleared the code. Drove about 25 miles and the SES light is back on. Hooked up my Actron and again, code P0348 - Camshaft Position Sensor A - Bank 2 circuit High Input.

I was told it is on the passenger side near the front/top of the engine. Did I replace the correct one? If so, now what?

Bando 07-26-2018 09:34 AM
Quote:
Originally Posted by Greg (Post 764019)
Not necessarily so. I hooked up my Actron CP9135 and cleared the code. Drove about 25 miles and the SES light is back on. Hooked up my Actron and again, code P0348 - Camshaft Position Sensor A - Bank 2 circuit High Input.

I was told it is on the passenger side near the front/top of the engine. Did I replace the correct one? If so, now what?
I know it's been 8 years, but does anyone know if bank 2 is on the pass. side? Same issue here and want to replace the correct one '02 4.4i

fishhouse4 07-26-2018 03:28 PM
Quote:
Originally Posted by Bando (Post 1138067)
I know it's been 8 years, but does anyone know if bank 2 is on the pass. side? Same issue here and want to replace the correct one '02 4.4i

On the M62, bank 1 is the right side of the engine (passenger) and bank 2 is the left side of the engine (driver).


All times are GMT -4. The time now is 10:47 PM.
Page 3 of 3 12 3
Show 200 post(s) from this thread on one page

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.