Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   P1349 Service Code (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/41157-p1349-service-code.html)

wallyx5 12-28-2007 10:26 PM

P1349 Service Code
 
Does any body know what a P1349 "service engine soon" code is? The guy at Autozone couldn't tell me.

The X started acting like it was misfiring or lost power under acceleration while driving on the freeway. Light came on, I drove for 10 minutes, stop opened the hood, engine was vibrating very hard for just idle. Closed the hood and light went off and everything went back to normal. I never turned the motor off and just drove way. :dunno:

jst2878 12-29-2007 12:54 AM

cam sensors i believe.

wallyx5 12-29-2007 02:25 AM

Cam sensor makes good sense. Does anyone know what the average life on a cam sensor is or is there a milage marker for replacement of sensor. 80,000 100,000 120,000? I am at 184,300

wallyx5 12-29-2007 03:05 AM

So with a little more research I found this:

www.obd-codes.com/trouble_codes/bmw/
P1349 code = Misfire Cylinder 4 With Fuel Cut-off

What does this mean? Do I need to change my plugs?

5xn3rf3 05-11-2009 07:38 AM

Bump, En1?

lo_jack 05-11-2009 04:18 PM

Pull the plug and see what it looks like. Could be plug, coil, injector leaking into cyl 4, among other things.

wallyx5 05-12-2009 12:09 AM

It turns out it was my idle control valve. The old one had broke and was not able to open and close all the way. I replaced it and problem solved.

lo_jack 05-19-2009 05:48 PM

I'm surprised you didn't get an ICV code for that. Hooray it's fixed though.

cavx5 05-19-2009 05:59 PM

wally do you really have 183,000k miles on your x..i am very impressed..other than this problem how has repair bill been...is it a 3.0 or 4.4...rob

Kuddel 05-19-2009 06:20 PM

Hello Cav,
just read your message on the forum,you wer surpised about the 184.000 k miles.
I have a 2000 X5 4.4(production 10/1999) with 245.000k on it never any big
problem, I don't;) want to nook it ,but yesterday it went in to
trans.safe mode so I don't know the problem jet, but the code 1747 came up, which tells me the three modules it feeds my have a problem, or defective wiring.
Kuddel


All times are GMT -4. The time now is 05:34 AM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.