Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   LED Lights from Zomk Speed - need Help (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/61377-led-lights-zomk-speed-need-help.html)

Philly X5 05-01-2009 05:46 PM

LED Lights from Zomk Speed - need Help
 
Just installed my Led Lights from Zomk Speed (Sonar) & they are dead, nothing...:dunno: old ones work fine.

Anyone knows what can be a problem?

mrbmwx5 05-01-2009 05:49 PM

Tell me more about it.
Do they even light up? or they flickering?

Philly X5 05-01-2009 05:55 PM

???

Philly X5 05-01-2009 05:56 PM

They wont light up completely...any ideas. I have 03 4.4i

jst2878 05-01-2009 05:57 PM

check the plug connections and make sure they arent bent and the clip is plugged in all the way. check the fuse for your taillights and make sure you didnt burn a fuse

Philly X5 05-01-2009 06:01 PM

Quote:

Originally Posted by jst2878 (Post 615384)
check the plug connections and make sure they arent bent and the clip is plugged in all the way. check the fuse for your taillights and make sure you didnt burn a fuse


Thanks but I dont think its a fuse... I connected my old lights and they are fine...#$%^ I already installed everything:(

rastaFarai 05-01-2009 06:32 PM

when i got this new set i had to plug it in a little tighter - took a while to get the plugs into the OEM. Make sure its completely plugged in. I know it sounds stupid..

If not - then return them I guess. Turn signal - nothing working?

Philly X5 05-01-2009 06:35 PM

OK,
I was looking at the light connector from the car and new Led lights and I dont think they are correct - one of the wire pins "Green" from the leds connects to "nothing" in my OEM harness
See below

Led's connector



http://i340.photobucket.com/albums/o...a/DSC_0378.jpg

Inside:

http://i340.photobucket.com/albums/o...a/DSC_0379.jpg

My OEM/BMW connector inside:

http://i340.photobucket.com/albums/o...a/DSC_0381.jpg


As you can see pins 1,2,4 & 5 are occupied but pin # 3 is empty...maybe this is my problem?

Can someone with LED's lights please check these on your pre-facelift for me before I go thought the pain of returning them back. THANKS>

Philly X5 05-01-2009 06:39 PM

Quote:

Originally Posted by rastaFarai (Post 615405)
when i got this new set i had to plug it in a little tighter - took a while to get the plugs into the OEM. Make sure its completely plugged in. I know it sounds stupid..

If not - then return them I guess. Turn signal - nothing working?

Turn signals are working fine ( I changed the turn signal bulb to the silver one) but the Led's are completely dead

mrbmwx5 05-01-2009 06:49 PM

Ok here the problem
On my 01 ( 1 2 3 4 5 6 ) 1 and 6 are empty and the #2 goes to Red , 3 goes to Yellow, 4 goes to Green , 5 goes to Black


All times are GMT -4. The time now is 12:38 AM.

vBulletin, Copyright 2024, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.