![]() |
|
Quote:
|
Quote:
|
Does it say DYNAMIC on the projector shrouds?
|
Quote:
If the chain was loose enough to be noisy I would definitely check the oil pan for chain guide parts. You can take a good look through the hole where the oil temp/level sensor goes without having to remove the oil pan. |
1 Attachment(s)
Quote:
Each have projectors that are made to not dazzle oncoming traffic by way of the cutoff - in a LHD they will direct light slightly down on the left side and up on the right side. |
Quote:
In principal the thought is correct but literally it's quite incorrect. The cutoff for LHD vehicles is such that light goes up from centerline ONLY right of center, but when properly dialed in the light on the left side will be bright straight out from centerline. https://uploads.tapatalk-cdn.com/201...fc92c07ce8.jpg https://uploads.tapatalk-cdn.com/201...880a46b60d.jpg Here is a visual of how that works. Notice the beam on the driver side (LHD) stays nearly horizontal. The passenger side (right in this case) rises quite a bit to illuminate the world especially road signs. |
1 Attachment(s)
Quote:
|
Quote:
It’s difficult to describe so I added a photo for clarity. |
I had rhd lights before from other cars and it’s very annoying for the on coming traffic. I was flashed every single time lol
Sent from my iPhone using Tapatalk Pro |
1 Attachment(s)
Quote:
I’m not sure. I don’t think so. Here is a pic. I have the car in the garage at my parents till the weekend so can’t see. |
| All times are GMT -4. The time now is 03:40 PM. |
|
vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.