Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   Trying to fix my X does this quote sound right? (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/92257-trying-fix-my-x-does-quote-sound-right.html)

pap smear 04-18-2013 12:16 PM

Trying to fix my X does this quote sound right?
 
*****update***** post #25


When I took my car for a PPI the shop had told me I needed to change both thrust arm bushings and ball joints and something about my rear arms. Basically my only symptoms was when the car is on the lift all 4 wheels have play. (left to right) i put 1000 miles on the car since and haven't noticed any problems. when I drive I have no vibrations in the steering or pulling even when braking but I do have an annoying creaking noise coming from the rear suspension so to fix the front thrust arm bushings with both ball joints and the bushings in the rear plus my idler pulley and the belt they quoted me close to $2500 I didn't have the money at the time but now I do so does this price seam reasonable or should I go elsewhere

Ricky Bobby 04-18-2013 12:23 PM

doesn't sound right to me.

just the rear bushings and ball joint plus idler pulley and belt? No more than a grand i'd say.

TerminatorX5 04-18-2013 12:33 PM

before changing the bushing in the rear, check out the polyurethane ones - you might like it, you might not, but worth checking out...

pap smear 04-18-2013 12:42 PM

both thrust arm bushings
both ball joints
both rear bushiings
idler pulley and belt

shop wants between $2500-$2500

TerminatorX5 04-18-2013 12:49 PM

you are in nyc - $2500 sounds a bit too much... for reference, check with a dealer, it will give you the top figure... then check around... does 2500 include parts? what brand parts? what if you have your own parts?

pap smear 04-18-2013 01:47 PM

i assume it was with parts and everything nothin more was talked about what brand or anything. as soon as they gave me the quote i was like uhh i think i left the stove on and ran out

they do charge a lot for labor and they charge tax also 8.75% i believe

Ricky Bobby 04-18-2013 01:52 PM

find a reputable shop over the bridge in Jersey? I can recommend a few

TerminatorX5 04-18-2013 02:04 PM

Quote:

Originally Posted by pap smear (Post 933095)
i assume it was with parts and everything nothin more was talked about what brand or anything. as soon as they gave me the quote i was like uhh i think i left the stove on and ran out

they do charge a lot for labor and they charge tax also 8.75% i believe

i hope you made it back in time for the stove!!!!:rofl::rofl::rofl::bustingup:bustingup:bu stingup

i do the same - i tell them - "I'll be back" with heavy accent, and never go back to that shop!!!:nanana:

pap smear 04-18-2013 03:23 PM

the scary part is they charge $130 an hour and claim their rate is 45% cheaper than the dealer

pnoyako85 04-18-2013 03:28 PM

Since your in NYC...Bring it to MSPEC!!... theyre in queens Village..
Look for Adam or Eddie
tell him Mike X5 Recommended you.

https://www.facebook.com/MSpecPerformance


All times are GMT -4. The time now is 01:08 AM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.