Xoutpost.com
Page 7 of 12 123456 7 89101112
Show 200 post(s) from this thread on one page

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   Bodykit (4.8) from E-bay arrived. Some pics (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/92767-bodykit-4-8-e-bay-arrived-some-pics.html)

bcredliner 06-17-2014 12:25 PM
1 Attachment(s)
Quote:
Originally Posted by fmugur (Post 998389)
Where did you find the picture on the left? The hood and the grilles are not the original prefacelift model. They have been modified. It looks cool with the big kidney grilles though. Look at the hood lines and you will see what I am talking about. The guy modified the hood somehow, I guess he cut it to make room for the big ones.
Good catch!

Stock pre-facelift 4.6

powers1 06-17-2014 01:33 PM
Quote:
Originally Posted by fmugur (Post 998389)
Where did you find the picture on the left? The hood and the grilles are not the original prefacelift model. They have been modified. It looks cool with the big kidney grilles though. Look at the hood lines and you will see what I am talking about. The guy modified the hood somehow, I guess he cut it to make room for the big ones.
You have to cut the width of the holes in the hood of the original grills to make room for the wider facelift grills.The height is left untouched.When you cut ,you need cut some 5mm to be bent back for sturdiness and also for you to be able to fit the inner grill.
Think the facelift grills on the older model loook better than on the facelift :D

jabata 06-17-2014 01:53 PM
most of you where you bought the kit 4.8, that site exactly? thanks and regards:thumbup:

m5james 06-18-2014 02:28 AM
Quote:
Originally Posted by 1naztyx5 (Post 998334)
This pic really helped me see difference in the front bumper alone about which kit will fit onto my 01. I've been debating a handful of things:

1) paint all the textered black in blue to match the body
2) leave the textured black and install one of these kits in blue
3) vinyl wrap the textured plastic in the new wet look carbon fiber wrap that's out now (which means I'd have to smooth the current rockers and bumpers)
4) do number 3 and install one of these kits.

I'm not really into the flared fenders because my iForged 20's have the perfect offset already and are dead flush w/ the fenders. If I installed the flares then I'd feel I needed to run spacers in the rear...and I'm all over the highway in regards to how I feel about the safety of spacers when driving the car hard that weighs as much as this.

wogboy_9000 06-18-2014 04:55 AM
Quote:
Originally Posted by powers1 (Post 998386)
Quite a few have fitted the pre-facelift lower spoiler om facelift but not vise versa,since the upper part of the facelift bumper is different ,as you can see from the pics!It can be done but you would need to cut/reshape the top of the pre-facelift bumper,quite easily!Anything can be done ,even fitting facelift grills on the pre-facelift ,but again you need to cut and reshape;)

The seller should send you the right part for your car..
Okay! So I've emailed the seller and he said that apparently they have made this front lip so that it will fit both models. This is even more concerning, as I'm dubious it's going to fit well on both pre and post face models. I'll cut out the tabs this weekend and see how it fits.

m5james 06-18-2014 05:10 AM
Is the only differences between the kits is the bumper design on the front...sides and rear don't change?

powers1 06-18-2014 05:24 AM
Quote:
Originally Posted by m5james (Post 998504)
This pic really helped me see difference in the front bumper alone about which kit will fit onto my 01. I've been debating a handful of things:

1) paint all the textered black in blue to match the body
2) leave the textured black and install one of these kits in blue
3) vinyl wrap the textured plastic in the new wet look carbon fiber wrap that's out now (which means I'd have to smooth the current rockers and bumpers)
4) do number 3 and install one of these kits.

I'm not really into the flared fenders because my iForged 20's have the perfect offset already and are dead flush w/ the fenders. If I installed the flares then I'd feel I needed to run spacers in the rear...and I'm all over the highway in regards to how I feel about the safety of spacers when driving the car hard that weighs as much as this.
4!Get the full kit and sell the flared fenders ;)

powers1 06-18-2014 05:27 AM
Quote:
Originally Posted by wogboy_9000 (Post 998513)
Okay! So I've emailed the seller and he said that apparently they have made this front lip so that it will fit both models. This is even more concerning, as I'm dubious it's going to fit well on both pre and post face models. I'll cut out the tabs this weekend and see how it fits.
You have the facelift and it should fit your car,but if you look at the shape on the ends of the bumper that go up, of both,the prefacelift is squared and the facelift is round,so dont see how it would fit without mods!:dunno:

m5james 06-18-2014 05:28 AM
1 Attachment(s)
I got the idea after seeing this.

powers1 06-18-2014 10:41 AM
1 Attachment(s)
Quote:
Originally Posted by m5james (Post 998517)
I got the idea after seeing this.
Looks mean!
Some quick photochopping :)!What you think about doing this to your front bumper?
Widen the lower grill and fit a honeycom net similar to the X5M:D


All times are GMT -4. The time now is 08:09 AM.
Page 7 of 12 123456 7 89101112
Show 200 post(s) from this thread on one page

vBulletin, Copyright 2024, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.