Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   Another 4.8 not starting.FIXED!!! (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/98324-another-4-8-not-starting-fixed.html)

Ricky Bobby 09-23-2014 04:19 PM

Quote:

Originally Posted by four.8is (Post 1009655)

^^^Your pricing above considering its the dealer, isn't bad. Anything to get us that Dynavin N6 review is helpful lol!

I'm sending my Bosch 5.7 in shortly for repair as well. Ask the dealer if yours is the 8.0 or not, I think it is though.

fmugur 09-23-2014 04:25 PM

It seems like the audi had this problem but it can be rebuilt now. I am not sure about on on facelift bmw though. Does 4.8is use bosch 8.0?
CHEAP ABS Bosch 8.0 Module Repair for Audi

four.8is 09-23-2014 09:39 PM

Ok guys, sure thing it was not the ABS module.
Same symptoms as before.They're trying to dig in a little deeper and will get on it first thing in the morning..will keep you posted.

Joshdub 09-24-2014 12:43 AM

Well on the bright side you have a new ABS module.

four.8is 09-24-2014 01:42 AM

Quote:

Originally Posted by Joshdub (Post 1009714)
Well on the bright side you have a new ABS module.

Ya the owner said he'll make it right by me..if he decides he will leave the module in at no cost or put mine back in it doesn't matter to me..i already paid they better find the culprit lol..he was very nice though...he apologized and took me home in his M5 and promised to take care of it first thing in the morning..we'll see what it might be; hopefully nothing really expensive.

Joshdub 09-24-2014 02:19 AM

That is great that they are promising to make it right.

The ABS module diagnosis sounded a bit off given the symptoms. Hopefully it quick and easy.

four.8is 09-24-2014 02:40 AM

Yes it was strange especially the motor dying while backing out and not cranking but starting like nothing's wrong after a few more tries...

What seems strange to me is the oil temp gauge and coolant temp gauge go all the way up when the motor won't turn over but come back to normal the one time it's ready to start.

And by the way, I'm not hearing the click click click sound anymore.its just silent.but when it's ready to start it fires right up.

upallnight 09-24-2014 07:58 AM

If it not cranking I would have them look at the EWS system. No clicks and not cranking means the starter solenoid is not receiving a signal from the DME to energize. Could also be a bad ignition switch.

Ricky Bobby 09-24-2014 08:01 AM

I was also suspect about the module given that the 8.0 hasn't reported the same failure prone rate as the 5.7 module. Keep us posted...

upallnight 09-24-2014 08:56 AM

Signs of a failing ignition switch:

https://www.youtube.com/watch?v=T7gM...991D3D41D978D7


All times are GMT -4. The time now is 11:53 AM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.