Xoutpost.com
Page 3 of 3 12 3
Show 200 post(s) from this thread on one page

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   Need help- reconfiguring factory air ride (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/99263-need-help-reconfiguring-factory-air-ride.html)

itscoo2pyopants 12-30-2014 06:29 PM
Quote:
Originally Posted by RIDIN DIRTY (Post 1020899)
I'm going to have to go a different route, 1-1.25" is not enough for wat I'm looking for. Here's a pic of my x5 that I photoshopped and the look I'm trying to achieve.

http://tapatalk.imageshack.com/v2/14...27b3b69cf7.jpg


Sent from my iPhone using Tapatalk
That blue looks so good

Rockit 12-30-2014 06:47 PM
I have an 02 4.4 with front and rear air bags. I don't have any ride height buttons stock. If I buy the lowering switch would it work with my car?

If so can someone send me the link that will work with my car please.

Thanks guys.

Ricky Bobby 12-30-2014 11:36 PM
Rockit did you run your VIN through a decoder? If you have EHCII as an option on your car you should have the ride level switch next to the headlight switch.

Rockit 12-31-2014 11:21 AM
I don't have any ride height switch next to the head light. I know I have rear air bags and a compressor...I'm 75% sure the front has air bags as well, I will look again.

Were do I look up the vin?

Ricky Bobby 12-31-2014 11:36 AM
I'll save you the trip to the website. Take a picture of your strut between the top of tire and vin and show me.

fizzx 01-02-2015 02:11 PM
Quote:
Originally Posted by 4.8isX5 (Post 1020950)
I basically rode at the height you photoshopped for a good while, till i moved to long island and with the roads and jerking around i raised it up a lil...

To get the rears as you have them photoshopped will not happen unless you get a camber kit which im not even sure at that height will even it out, and much larger spacers then 30mm.

Heres mine at that with 25/30 spacer setup

http://tapatalk.imageshack.com/v2/14...62cff19174.jpg
In this pic did you plasti-dip your OEM wheels or have them painted black?

I ordered that software and cable from the Romania dude...should arrive next week :-)


All times are GMT -4. The time now is 03:58 AM.
Page 3 of 3 12 3
Show 200 post(s) from this thread on one page

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.