| sickyute |
09-29-2007 12:01 PM |
there's one more problem with the itouch.
when the 6fl is plugged into the vehicle (usb+audio), then u go ahead and plug it into the itouch, the itouch will not work. It will respond in a crazy manor, it will just keep blinking and blinking and displaying accessory connected. In order for it to work you must unplug the 6fl, usb end, then connect the itouch, then reconnect the usb to the vehicle. it will work fine then.
however, like mentioned in one of the above links provided, the looks like it is unable to charge the itouch. there will be no charging display on the itouch so it will look like it's not being charged. From what i've noticed, it's actually being charged but probably at a low rate where the itouch can't detect. I'm certain that it's not draining the ipod cuz i've yet to see my battery go lower after much useage.
in the provided link a couple of posts up, there's mention of another cable specifically for use with the iphone which enables it to be charged @ 500mah and will cause the charge signal to display. I'd imagine u'd need that same cable for the itouch. I've yet to find any other info on that cable and it supposedly has been available from August.
|