Retrofit LED headlights?

[Tony@SMS]

Just installed mine,Now i have to do the wiring part witch should be 2 wires per light and then the coding part.I will update on that once I'm done.

[Gixxerboy63]

Excellence!

[Gixxerboy63]

Can anyone help me acquire a wiring harness for the LED retrofit?
Thanks.

[Tony@SMS]

Originally Posted by Gixxerboy63

Can anyone help me acquire a wiring harness for the LED retrofit?
Thanks.

I installed my headlights,it's a plug & play and also make sure you do have a FRM3 module(the only 2 things that do not work are your high beams an side LED).I have inside scoop from BMW and we were looking at the headlight harness and the only difference from the regular headlights and the LED headlights is 2 pins that are missing out of the stock harness(1 pin goes to the junction box and the other goes to the FRM3 Module from the headlight) that's each headlight.i already ordered from BMW the pigtails to do my own 2 wire harness per side and once done and coded I'll give an update and help anyone else do it.

[Gixxerboy63]

That would be great!
I am sitting on my new headlights, waiting on a harness.

I've tried to order the harness on various euro websites, but the sites never allow me to complete the order. I have also tried to register on these sites, but this also fails.
(This has really sucked)

[Tony@SMS]

Originally Posted by Gixxerboy63

That would be great!
I am sitting on my new headlights, waiting on a harness.

I've tried to order the harness on various euro websites, but the sites never allow me to complete the order. I have also tried to register on these sites, but this also fails.
(This has really sucked)

If you don't mind the error lights on cluster you can install the headlights,they will work but like I said the high beams and yellow corner LED will not.your turn signals,LED daytime running lights and tegular beams will work.

[Gixxerboy63]

I would prefer to have full functionality.
Having Hi Beams, steering wheel inputs and corner lights are important to me.

[Chris F.]

Still bummed we have to take out a perfectly good FRM3 to get one with newer coding installed....BMW retrofit instructions note ISTA/P can update older FRM3 modules but of course no mention of how.

Any thoughts here? Bummer a new FRM3 is $300+.

[Tony@SMS]

Originally Posted by Chris F.

Still bummed we have to take out a perfectly good FRM3 to get one with newer coding installed....BMW retrofit instructions note ISTA/P can update older FRM3 modules but of course no mention of how.

Any thoughts here? Bummer a new FRM3 is $300+.

If you have a Indy shop that's has a Autologic diagnostic tool,they can code your FRM3.

[Chris F.]

Originally Posted by Tony@SMS

If you have a Indy shop that's has a Autologic diagnostic tool,they can code your FRM3.

People here are saying you need to get the latest revision of the FRM3 in order to have it coded - apparently the older modules don't have the LED software in them to work properly.

In reading the retrofit document, BMW's ISTA tool can update the module without replacement.

Hmmmmm wait, can't we access ISTA online for $30 a day or something?

https://www.bmwtis.com/

Chris