PA Soft 1.4.1

[jdstrickland]

I'm disappointed. I got my module and software, only to find that the software requires WinXP, which is no longer supported. The software does not install into Win7, I did not check Vista.

I got the software to load, but the difficulties are probably me, not the program. I plug the module into the OBD II data port, and let it report whatever it can find, but it does not find the DME, nor several other controllers. It does find some things, like the Light Control Module (LCM).

On the LCM, I can set the two variations of Daytime Running Lights, one is the traditional setting where the high beams are on at half power, or whatever they are at, and the other is that the entire light system is on if the engine is running, regardless of the setting of the light switch. Kind of like the Auto setting where the lights come on at night or in a tunnel, except they are always on and do not wait for darkness. The entire lighting system is on in this setting. I was hoping to find a setting that turned the angel eyes on as daytime running lights.

Do I have the wrong PASoft module for my '05 X5, 3.0? Shouldn't it be able to see inside of the DME, and the other grayed-out systems?

Is there a setting to have the angel eyes on as DRLs?