DIS v57 running on Windows 10 and VMware - Page 6

1iwilly · #1 03-03-2016, 05:23 AM

yes i have vmware ethernet adapter mine is set to automatic obtain an ip address mayber that's the problem.??

Quote:

Originally Posted by X5only

My settings are exactly like yours. I suspect you're missing the vmware virtual Ethernet adapter for vmnet1. Check your windows device manager for it. If the adapter is missing, it can be re-added by running network editor in vmware workstation selecting host and configured (in windows control panel network settings) as shown in the picture.

Have you also verified that the APITest is successful? APITEST is in Easy DIS configuration menu.

1iwilly · #2 03-03-2016, 09:33 PM

ok did a apitest i guess it pass.?? here is a pic

1iwilly · #3 04-17-2016, 09:22 AM

well i got dis working finally on win 10 something that was over looked
1st the OBD.INI file that is in the c"windows folder had com6 instead of com1
in the c:/ediabas/bin directory it was fine showing com1 but not in windows folder i change it to com1.then also in c:/ediabas/bin/ediabas.ini file. i made a changes to this line=; Interface
; Description : Connected diagnosis interface
; Default = EDIC
; Interface = STD:OBD

; Additional information (in German) :
; Bitte beachten: Der HW-Treiber fuer das Interface muss installiert sein!

mine was showing FUNK change it to OBD now dis is working

X5only · #4 04-17-2016, 08:58 PM

Wow, that was hard..wonder how your configs got messed up that way. Congrats, you can now rightfully acclaim to be a DIS troubleshooting guru

1iwilly · #5 04-18-2016, 11:40 AM

you dam right it was hard 4 months in the making.LOL
don't forget this is for win 10 not wxp

Quote:

Originally Posted by X5only

Wow, that was hard..wonder how your configs got messed up that way. Congrats, you can now rightfully acclaim to be a DIS troubleshooting guru

Traveler218 · #6 03-26-2017, 11:51 AM

Hi, I am new to this forum but have been reading this post as I am trying to get the DIS 57 software to run on my Win10 computer. I upgraded to VMware workstation 10, but continually get a an error when I try to run the DIS v57 virtual machine.

"Failed to lock the file

Cannot open the disk 'C:\BMW Diagnostic Tools\DIS v57\DIS v52.0-000001.vmdk' or one of the snapshot disks it depends on.

Module DiskEarly power on failed.

Failed to start the virtual machine."

I bought this package on ebay several years ago, and, as I recall, actually had it running on one of my old laptops running XP.

Has anyone seen this error or know anything about how to clear it?

BigBlack48is · #7 06-05-2017, 12:17 PM

Quote:

Originally Posted by Traveler218

Hi, I am new to this forum but have been reading this post as I am trying to get the DIS 57 software to run on my Win10 computer. I upgraded to VMware workstation 10, but continually get a an error when I try to run the DIS v57 virtual machine.

"Failed to lock the file

Cannot open the disk 'C:\BMW Diagnostic Tools\DIS v57\DIS v52.0-000001.vmdk' or one of the snapshot disks it depends on.

Module DiskEarly power on failed.

Failed to start the virtual machine."

I bought this package on ebay several years ago, and, as I recall, actually had it running on one of my old laptops running XP.

Has anyone seen this error or know anything about how to clear it?

That is vmware telling you it cannot open ( or find ) one of the files it is looking for. You should check to see if the .vmdk files are located in that directory and are all present.

It could be looking for a snapshot file too. look in the snapshot manager to see if there are old snapshots that have been deleted.

Hope this helps!