Wheel Spacers and YOUR pictures please

[Pre-H20]

please post a picture..... mine are a little bit taller and wider..... i would be curious to see what 25mm did for yours....

[TiAgX5]

I went with H&R DRA 25mm spacers in the rear, the wheels are 19s (9" & 10"), with 10mm more outward offset then the OE BMW 19s.

So the fronts are shifted 10mm, rears are 35mm.

[Pre-H20]

Tiagx5.........

Do you mind me asking what size tires you were running in that picture on your 9 and 10's ?

[TiAgX5]

I run the OE sizes, 255-50 & 285-45.

The pic is from 2 years ago, I have Vredestein Ultrac Vortis on it now.

[Clockwork]

Originally Posted by Pre-H20

please post a picture..... mine are a little bit taller and wider..... i would be curious to see what 25mm did for yours....

http://www.xoutpost.com/1076984-post11.html

[Pre-H20]

TiagX5,

thank you..... that gives me a great idea of what to expect....

I'm at 255-50-19's in the front

275-45-19's in the Rear

So mine would look pretty close to yours.

[TiAgX5]

The 285 Vreds have a contact patch width of over 9.5" @ 50 worn (way wider then the 285 Hankook Ventus).

The difference is huge!

[Pre-H20]

I like that picture...... do you have a shot of the Vreds more from the back instead of the side angle like the one you posted?

[TiAgX5]

This shot is more from the rear.

[X53Jay4.8is]

Originally Posted by TiAgX5

This shot is more from the rear.

AHHHH! those Vorti's look mighty fine. My X is currently at the body shop getting all of the nicks and dings taken care of. When it returns I will send the rims off for reconditioning and then install a set of Vortis.