|
Thanks for the tip. I hadn't checked the fuses so its always good to start with the basics. They were good so I pulled out the passenger side switch. Not sure what exactly was going on in there but under one of the connectors was an oily film. I opened the switch up and inside there was oil here and there. I cleaned the connector, plugged it back in and all is working as normal.
Its interesting that the passenger and driver have the same connectors. I was expecting a lot less wiring with one switch vs all that is going on over on the drivers side. I took the opportunity to drill some little drain holes in the bottom just in case water ever does find its way in.
|