got great weather to finally install and inspect everything today. ABS sensor that I forgot to install back to the spindle installed, lug bolts torqued using the correct 19mm socket, splash shield installed and fired her up and test drove around.. the mount replacement was a success and worth it, the roughness I felt before and the vibrations at idle/stop are all gone..
One thing I need to mention is that I have a hard time putting back in the cv axle back to the hub, it's a tight fit and I have to pound it with a block of wood and hammer to seat the hub..it's going to be interesting pushing the axle back out next time..
https://www.facebook.com/Bmw-e53-2508322126058762/
03-14-2018, 10:25 PM
Threaded Mode
