Headlight problem after EuroClear conversion on a 2004 4.4

[DINANM3]

I installed euro clear headlights from rover active on my 04 4.4 recently and i thought everything was fine with the install but tonight i was following a friend somewhere and he called me from his cell and told me my passenger side headlight looked like it was aimed higher than my drivers side headlight and it looked like the pass side had a highbeam on and the driverside had a low beam on.

So i went home pulled up strait to my garage door about 5 feet away and noticed the pass side headlight was pointed higher than the driverside. So i measured from the ground to the center of where the beam was pointing and the driverside headlight is pointing 4 inches lower than the passenger side.

I was wondering if this happened to anyone yet? Also if i did something wrong with the install that caused it and if so how do i adjust it. Or if its not that is there something that is broken or malfunctioning that needs to be replaced like the self leveling system in the headlight. Please help, it looks really bad and the pass side light is like blinding people im behind.