|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
|
LinkBack | Thread Tools | Display Modes |
|
#29
07-15-2020, 02:35 PM
|
|||
|
|||
|
Backed up a few steps & tested grounds & signals with test light & multimeter.
* Clutch tests good, as does activation signal. * All grounds good (including low/high pressure switches) * Can ONLY activate fan from tool. Will not activate from control panel (either, I have two). Can not confirm anything on small, black control wire for fan. Assumed signal there if activated by tool, but now questioning that. * The ONLY code I have, which is generated every time I try to turn on A/C is DME: Fan activation I was ready to replace compressor & condenser as last resort, but the only real data I have is still pointing to the fan (also new, but sourced on Amazon). I'm going to try another fan (still not the $4-600 OEM), and while I'm replacing will unwrap & inspect the wire back as far as I can get. No clear damage or tampering noted thus far, but the whole branch is wrapped in plastic electrical tape that doesn't appear original. Could be, but... Also going to replace radiator fan clutch at the same time (PTA!) since it's cheap & the only piece of cooling system that's not new.
__________________
Chris  ~~~~~~~~~ '10 X5 35D - Performance mods & Kassel tune // '04 Mini R53 - lots of mods, rebuilt // '03 Mini R53 - sold '05 X5 3.0i - Recently acquired for wife & daughter '03 X5 3.0i - lots of upgrades, passed to son // '98 540i - other son's '94 E36 318ic - son's wrecked // '96 E36 328ic - son's sold 
|
| Bookmarks |
|
|
|
|
Threaded Mode
