Help...Coolant Leak.

[Franklin Joseph]

I parked my X5 on Sunday...went in the garage today and saw coolant on the floor. Checked the reservoir and it was empty...i guess it was a slow leak when i drove the car on sunday.

I filled it up and started the car, and looks like the leak is coming from the driver side...somewhere in the mid point of the engine.

I checked the radiator and it looked fine, and its not leaking from the reservoir.

Which side is the water pump? are there coolant hoses running on that side?

thanks
franklin

[The Cleaner]

There is a coolant accumulator that connect the heads that is in the back of the engine. There are about 8 or 9 water connection on that thing. It's common to see leaks there that are slow. Start there, and hope it's not the o-rings in the middle, they are hard to change.

[Franklin Joseph]

thanks....i tried looking closely again...and looks like its leaking from the sensor right by the reservoir.

Figure i'd change the reservoir and the sensor (dealer has instock)...anything else i'd need to replace around the reservoir? the cap is fairly new.

thanks
franklin

[4.6is Ryder]

Franklin, it could be the valley pan gasket. Checkout my thread.....Phil
http://www.xoutpost.com/x5-e53-forum/...ngs-below.html

[ThrasherFan]

I just replaced the coolant reservoir due to a pin hole leak and it was pretty easy to see were the leak was based on dried coolant. I would think you would also see dried coolant as well if you had a leak in that area.

Valley Pan Gasket could very well be the culprit (which I've also had replaced).

[4.6is Ryder]

Originally Posted by ThrasherFan

I just replaced the coolant reservoir due to a pin hole leak and it was pretty easy to see were the leak was based on dried coolant. I would think you would also see dried coolant as well if you had a leak in that area.

Valley Pan Gasket could very well be the culprit (which I've also had replaced).

I just replaced mine last week and the cap.....Phil

[we350z]

My vehicle was in some time ago for the same pinhole leak in the reservoir.

Originally Posted by ThrasherFan

I just replaced the coolant reservoir due to a pin hole leak and it was pretty easy to see were the leak was based on dried coolant. I would think you would also see dried coolant as well if you had a leak in that area.

Valley Pan Gasket could very well be the culprit (which I've also had replaced).

[Franklin Joseph]

thanks yall.
i'll also keep an eye on the valley pan, although its on the intake side (not leaking) i rather do preventive then be stranded.

Phil, so ur CPO covered it huh...might just drop the x5 off and have it checked for a few items.

thanks again.

[4.6is Ryder]

Originally Posted by Franklin Joseph

thanks yall.
i'll also keep an eye on the valley pan, although its on the intake side (not leaking) i rather do preventive then be stranded.

Phil, so ur CPO covered it huh...might just drop the x5 off and have it checked for a few items.

thanks again.

Do that....ask for the S/A and Tech I recommended to you.......Phil