|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
|
LinkBack | Thread Tools | Display Modes |
|
#29
08-31-2008, 09:01 AM
|
||||
|
||||
|
Once you pull your fuel rail off, the metal clips that hold the injectors to the rail will be easy to pop off. After that, just wiggle and pull the injectors out. They just push in with o-rings and are held in place with the clips. Just BE SURE the clips are fully/properly seated when you put it back together. And the o-rings should be the same size as most multiport fuel injection systems. (bosch style injectors)... so if you want to replace them you can go to the local parts store and get them.
Some people even use 5.0 mustang injectors in old 318ti's as an upgrade...
__________________
"When you do things right, people won't be sure you've done anything at all" (Bender, futurama) You make something idiotproof, they'll make a better idiot You think professional is expensive, just wait until you pay for amateur. Never let your sense of morals prevent you from doing what is right. Examine what is said, not who speaks. X5 pics RIP 4.6is..... 2003 4.6is 
|
| Bookmarks |
|
|
|
|
Threaded Mode
